What are the rear turn signal (wire) colors? - 2006 Chevrolet Impala

could be green blue or green yellow.

Check your bulbs. Almost always your description means a bulb is burned out. Check for good grounds.

When installing the kit, follow the manufacturer's instructions. The color coding of the wires is usually standard throughout the industry. One point to note: some domestic vehicles, and most imported vehicles, have separate turn signals. On most domestic vehicles, the brake lights and rear turn signals operate with the same bulb. For those vehicles without separate turn signals, you can purchase an isolation unit so that the brake lights won't blink whenever the turn signals are operated.

Check this reference image about this subject...



Hope helps.

Please check the fuse, if okay there is a switch controlled by the brake pedal. Make sure the switch works. The brake lights wiring also goes through the signal light switch. I can't tell you the wire colors to check for 12v into the signal switch or the color wires coming out of the switch

I suggest check this diagram...



And visit this LINK for other details and parts location.

Good luck (remember rated this).

H).l-blu wire connect to left front turn signal J).dk-blu wire connect to right front turn signals K).brown wire connect to hazard/flasher relay output L).purple wire conect to turn/flasher signal M). yellow wire connect to left rear stop hazard light N). dk-green wire connect to right rear stop/hazard light P) white wire connect to stop light swirch output

Hello heinz2127: My name is Roger and i will help you. The rear brake wires are green and yellow. They also are the turn signal wires. The brake lights work through the turn signal switch.The turn signal switch has logistics for determining which side is blinking so as to make the opposite side to show park brake light.Check the fuse box for a blown fuse. Look at the fuse box under the hood. Also try this. Turn on the four way flashers. Step on the brake pedal . The lights should stop flashing If not I would replace the turn signal switch.

Good Day
the rear turn signal will be the yellow wiring.

Cheers

I can send you a copy of the diagram but I will need an email address, so let me know if you still need it

exactly what does it do? please explain what happens when you press the brake turn on the light than brake signals ect.....