Hi. I have a dead mouse in the interior ventilation system and need a schematic to show the pathways and where the fresh air intake is

To cool off your Toyota after it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.

Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).

On humid, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.

Keep the area under the front seats clear to allow air to circulate throughout the vehicle.

On cold days, set the fan speed to high for a minute to help clear the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.

When driving on dusty roads, close all windows. If dust thrown up b the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the in intake be set to FRESH and the fan speed to any setting except "OFF".

If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.

HEATING

For best results, set controls to;
Fan speed ---- Any setting except "OFF"
Temperature----Towards WARM (red zone)
Air intake ---- FRESH (outside air)
Air flow ---- FLOOR
Air conditioning ---- OFF

For quick heating, select recirculated air for a few minutes. To keep the windows from fogging, select fresh after the vehicle has been warmed.

Press the "A/C" button on for dehumidified heating.

Choose floor/windshield air flow to heat the voltage interior while defrosting or defogging the windshield.

AIR CONDITIONING

For best results, set controls to;

Fan speed --- Any setting except 'OFF"
Temperature --- Towards COLD (blue zone)
Air intake --- (outside air)
Air flow --- PANEL
Air conditioning --- ON

For quick cooling, move the air intake selector to recirculate for a few minutes.

VENTILATION

For best results, set controls to;

Fan speed --- Any setting except 'OFF"
Temperature --- Towards COLD (blue zone)
Air intake --- (outside air)
Air flow --- PANEL
Air conditioning --- ON

DEFOGGING

The inside of the windshield

For best results, set controls to:

Fan speed --- Any setting except 'OFF"
Temperature --- Towards WARM (red zone) to heat; COLD (blue zone) to cool
Air intake --- FRESH (outside air)
Air flow --- WINDSHIELD
Air conditioning --- ON

The outside of the windshield

For best results, set controls to:

Fan speed --- Any setting except 'OFF"
Temperature --- Towards WARM (red zone)
Air intake --- FRESH (outside air)
Air flow --- WINDSHIELD
Air conditioning --- OFF

On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.

DEFROSTING

The outside of the windshield

For best results, set controls to:

Fan speed --- Any setting except 'OFF"
Temperature --- Towards WARM (red zone)
Air intake --- FRESH (outside air)
Air flow --- WINDSHIELD
Air conditioning --- OFF

To heat the vehicle interior while defrosting the windshield, choose floor/windshield air flow.