Reset maintenance light on a 2006 Scion TC - Scion Cars & Trucks

SOURCE: How do I reset the check engine light for a 2006 scion tc?

YOU CAN GO TO ANY ADVANDED AUTO PARTS AND THEY CAN HOOK UP A OBD2 SCANNER, WE THEY DO ASK THEM TO RESET THE LIGHT FOR YOU.. THIS IS A FREE SERVICE TO THE PUBLIC..GOOD LUCK KEITH..

SOURCE: Can a 2006 Scion Tc cd player fit into a 2005 Scion Tc?

yes its the same plugs but you wont have the steering weal control

SOURCE: 2006 scion xb 100,000 mile what kind of maintenance do i need??

I would recommend getting the transmission serviced, and the antifreeze changed.

SOURCE: how do i reset the required service indicator

1) push down the button you usually push to reset the trips until it goes to ODO and turn the car off 2) while holding down the button, turn the car to on, but dont turn the engine on 3) you will see 5 "-" dissappearing pretty quick, wait until all of the dashes are gone and u will see 00000 on the odometer and the maintenence light will be gone.

Shannon L Washam

• 169 Answers
• Posted on Oct 09, 2009

SOURCE: tire presure light stays on psi is 32 all tires

Hello! You're problem could likely be a problem with the TPMS, or (Tire Pressure Monitoring System) - sensor. There is one in each wheel, and it's recommended that with any tire changes that they be rebuilt or replaced. I'm not sure if you've reset the tire pressure switch or not, but if you haven't and aren't familiar, the button is located inside the glove box. With the car on, press the button for 3-5 seconds and release. Turn the car off, and then back on and your light should be off.

Hope this helps and good luck! Thanks for using FixYa!