How do I change a 2002 Mazda protege rear motor mount?

Power window repair - Mazdas247

www.mazdas247.com > ... > Mazda Protege Forum > Protege How-To

Aug 8, 2005 - 10 posts - ‎10 authors

I have a 2002 and last week the driver's side power window died a horrible death. ... Check out my mods -> 2001 Mazda Protege LX aka Rum Runner ... My front pass sidewindow won't go up or down anymore. haven't taken ...


Passenger Window on 2007 CX-7 will not come up ...

2 posts

Nov 28, 2012


Driver's side window auto-up/down issues - Mazdas247

15 posts

Jun 10, 2011


Power Window Problem - Mazdas247

7 posts

Aug 9, 2009


Driver Side window controller won't work

14 posts

Nov 11, 2006


More results from www.mazdas247.com

2003 Mazda Protege 5 Replacing The Power Window Motor ...

? 7:02


https://www.youtube.com/watch?v=N3GP2UwTtAQ

Feb 3, 2015 - Uploaded by Steve K.

2003 Mazda Protege 5 Replacing The Power Window Motor and Regulator. Steve K. ... Looks like you just ...

Amazon.com: Dorman 741-741 Mazda Protege Fr

https://www.youtube.com/watch?v=ygOPOCATanI

Hope this helps

yes it needs the fob, Keyless Entry Remote Fob Clicker for 2002 Mazda Protege5 With Do It...



2002 Mazda Protg Keyless Remote Key Fob
http://www.fobkeyless.com/2002-mazda-protege-keys-remotes-replacement.html

Check you motor mounts. With someone in the car and e-brake and main brake applied; Put vehicle in drive and bring RPMS UP and then let off. If you see the motor move excessively then the mount is broken on the side that lifts up. Put it in reverse and do the same. both mounts can be broken and there is usually a third mount so check them all.

to remove that support is recommended to use keys of extensions to be used by the top and back of the engine,,,recommended to release the air filter and battery sleeve for space

double check you got the correct firing order

2002 Mazda Protege DX
2.0 liter DOHC L4 Back to Last Page

how to change rear stabilizer bar 2002 mazda protege

If it is a rear disc brake system, the only special tool would be an allen wrench:

Turn the manual adjustment gear counterclockwise with an Allen wrench to pull the caliper piston inward (turn until it stops).

If it is a drum type brake system...no special tools...just a screwdriver, pliers....

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

just remove the glove box and its right behind it just take the white pug out and the two phillips screws to remove the resistor out, replace with the new one and cool off!!!! Hope this helps