1991 Chrysler LeBaron Logo

Related Topics:

T
Tracy lovelace Posted on Dec 24, 2017

Where is the reverse lights switch on a 91 leberon automatic mine is only 2 wires

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

91 leberon automatic where is reverse light switch

Under the dash and is part of the neutral safety switch. It is adjustable, slots in the bracket, to set the switch for neutral start when in park or neutral. Backup lights are connected to that switch also.
0helpful
1answer

No reverse lights bulbs good and fuse 91 leberon automatic

wire/switch on reverse gear selector has been disconnected.
1helpful
2answers
0helpful
1answer
0helpful
2answers

The reverse lights / back up lights don't work

I would say that your reverse light switch is faulty, 98% sure its on your transmission. As for your cd player, you may have to replace that with another unit.
0helpful
1answer

2000 chevy blazer automatic. reverse lights staying on????

sounds like you have a bad reverse switch,possibly neutral switch if the reverse circuit is built within the neutral switch.you could have a bad wire causing the lights to be on all the time(power worn though touching the wire that goes to the backup lights.
1helpful
1answer

Are the back up (reverse lights) in series---where if one bulb is out neither side works---on a jeep cherokee?

no, they are 12 volt bulbs and require parallel wiring. If you have a manual transmission, check the reverse light switch on the transmission for continuity with the transmission in reverse. If you have an automatic, the reverse switch is integrated into the transmission range switch at the shift cable attach point. In either case, the wires at the switch are yellow/dark green stripe and brown/light green stripe.


jturcotte_518.gif
0helpful
1answer

My 91 camrys brake lights wont work. ALL fuses and bulbs are new. What now ?

Welcome to FIxYa.com



There is a brake light switch located at the brake pedal (under dash) See figure

1. Remove brake pedal tension spring.

2. Disconnect switch wire connector.

3. Remove switch mounting nut, then slide switch from mounting bracket.

4. Reverse procedure to install.leedavidian_22.png



Thank you for using FixYa.com

Regards, Lee Davidian

5helpful
1answer

2005 Pathfinder no reverse lights

On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced
0helpful
1answer

2000 dodge neon no back up lights wiring and bulbs and fuses good

Range sensor? that would be a speedometer odometer sensor ! range traveled! you request if for reverse light switch yes? wiring and bulbs not the issue! the switch is located behind and down drivers side head light 1999 model is under battery box must remove to gain entry to switch round plug with flat top 2 wires entering hope this helps.
Not finding what you are looking for?

199 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...