How do I replace the hood of my 2000 Pontiac Bonneville? I already have the parts

SOURCE: 2000 pontiac bonneville wiring harness

u can get one to use out of a srvice book at the libruary

SOURCE: Pontiac Bonneville(2000) oil pressure sending unit

The oil pressure sending unit is located behind the oil filter, Threaded into an aluminunm housing. It has wiring that plugs into the sending unit. The oil filter has to be removed and you will need a deep well socket and a 6 inch extension. Change the oil and the sending unit together.

SOURCE: how to open my pontiac bonneville 98 hood when the

See if you can grab the broken cable end with a pair of vise grips then just pull. It also helps to give a slight bounce on the leading edge of the hood while pulling, to take tension off the lock mechanism if it is binding.
The cable is exactly like the hand brake cable on a bicycle...You need to pull the inner cable.

SOURCE: replace horn fuse in fuse panel of 1992 pontiac bonneville

Your fuse box is located on the driver side under the dash board. Up above where your brake and gas pedal are located. There should be a plastic cover that can be snapped off to reveal all of your fuses and on the inside of this plastic cover there should be a diagram of the fuses that are in use.

SOURCE: how do I replace headlight switch in my 95 Pontiac Bonneville

assuming that u have replaced any bad fuses. you have to remove the cover around the instrument panel. then u need to have a socket small enough to remove the screws that hold the head light switch in place. the head light switch knob should come out. you may have to pull it out first before u take the cover off. then remove the old switch and disconect the wires then replace the switch. i hope this helps