Need the wiring diagram for the cab floorboard wiring

Depending on the sub-model, 2005 - 2012 versions *can* fit. Look for yours in the list below:

• Fit note: Crew Cab Pickup, Extended Cab Pickup

This product fits the following Nissan Frontier submodels

• 2013-2013: Desert Runner; 6 Cyl 4.0L;
• 2011-2013: S; 4 Cyl 2.5L;
• 2011-2013: SL; 6 Cyl 4.0L;
• 2011-2013: SV; 4 Cyl 2.5L;
• 2011-2013: SV; 6 Cyl 4.0L;
• 2009-2013: PRO-4X; 6 Cyl 4.0L;
• 2011-2012: S; 6 Cyl 4.0L;
• 2008-2010: SE; 4 Cyl 2.5L;
• 2005-2010: LE; 6 Cyl 4.0L;
• 2005-2010: SE; 6 Cyl 4.0L;
• 2005-2010: XE; 4 Cyl 2.5L;
• 2005-2008: Nismo Off-Road; 6 Cyl 4.0L;

When calling to inquire or order - tell them the year, make, model (S, SL, SV, LE, SE, XE, etc.) Cab type (crew, extended, etc.) before paying. Have a look at the link below.

2005 2012 Nissan Frontier Tail Light Replacement Driver Side...

Yes, you would have to change the entire harness and engine computer cause a 4 cyl computer will not run a six cyl

yes it is high.
plugs at 4-5.00 each = 20-30.00 4 cyl. or 6 cyl.
wires maybe 40.00
cap & rotor maybe 30-50.00
labor @ 15.00 hour maybe 2-3 hours at most.
30-45.00
total 165.00
should be under 200.00

V8 engines as follows:

289,302,5.0L(Carb.)
390,406,427,428
400,460

(cyl numbers)

Front (engine)
5 1
6 2
7 3
8 4
(firing order)
1-5-4-2-6-3-7-8


5.0L EFI
351, 5.4L, 5.8L

(cyl numbers)

Front (engine)
5 1
6 2
7 3
8 4
(firing order)
1-3-7-2-6-5-4-8

Hope this helps, let me know.

For the 1996 Ford F150 with teh 4.9L In-Line 6-Cylinder:

Firing Order:
1-5-3-6-2-4

Cylinders:
(back)
|...6...|
|...5...|
|...4...|
|...3...|
|...2...|
|...1...|
(front)

Distributor:
...(back)
.......2...(+)-screw
6............4
3............1
(+)...5
...(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

You didn't post your engine size so please pick the applicable diagram:



1996-98 4.3L Engines Firing Order: 1-6-5-4-3-2Distributor Rotation: Clockwise



1996-98 5.0L, 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise




4.3L Engines Firing order: 1-6-5-4-3-2 Distributor rotation: Clockwise



4.8L, 5.3L and 6.0L Engines Firing order: 1-8-7-2-6-5-4-3 Distributorless ignition system (one coil on each cylinder)



5.0L, 5.7L and 7.4L Engines Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

According to Chilton's manual, it is 1-5-3-6-2-4. Hope this helps.

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway.

I'm not sure if you have the 2000 Dodge 1500 with the 3.9L (6-Cyl), 5.2L (8-Cyl), and 5.9L (8-Cyl) Engine; however I have included.

For the 3.9L (6-Cyl):
Firing Order:
1-6-5-4-3-2
Cylinders:
(back of engine)
6----------5
4----------3
2----------1
(front of engine)
Distributor:
(+).6...5
1...........4
...2....3..(+)-screw

For the 5.2L AND 5.9L:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
(back of engine)
8...........7
6...........5
4...........3
2...........1
(front of engine)
Distributor:
.......(back)
.........3
....4........6..(+)
8...............5
(+)1........7
.........2

Again my apologies...

Let me know if this helped, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

The firing order is 153624

There is a diagram at this link:

http://www.mre-books.com/shopmanuals/firingorder.html

------>>>FRONT>>>>of Van >>>>

______________________________
#5 cyl #6 cyl

#3 cyl #4 cyl

#1 cyl #2 cyl
______________________________
_________________
I COIL BLOCK I
I I
I #3 #1 #5 I
I I
I I Firing Order Is
I I 1 2 3 4 5 6
I #6 #4 #2 I
I _______________I_

the Wires Go Accordingly to prospective Terminals, So Sorry Unable to Send Pics through FixYa, A Formating Problem Exists
and they show on my end but not on your end this is TRUE and CORRECT To The BOOK other than the Lines from Coil to Spark Plug ENDS at CYLINDERS. Please dont Forget to RATE Me
Thank You And Happy Motoring!!