How to reset service intervals on merc e270 cdi 2005

SOURCE: 2005 BMW X 3 service interval reset

Hi geonkm, if you look on the instrument clusteryou will see 2 buttons in the lower centre part of the dash, make sure the ignition is swiched off, press and hold the left button and turn the ignition on to the first position keep holding the button down until you see the display change, then lift you finger and press and hold again untill reset appears ( normally after aprox 5 seconds ) it will also flash, once this happens lift your finger again then press and release straight away, this should reset the service indicator. regards mark ps you may want to print this off prior to trying to reset to make it easier to follow, good luck

SOURCE: Merc E270 cdi (W211) gearchane vibration

i have a ford escape 4wd and when i go 40 km and over i get a vibration what is causing that vibrartion

SOURCE: How do you manually reset the service interval on

this can only be done with a diognostic scanner

SOURCE: want to reset service interval? i've just finish

Ok,
Then turn on ignition. Press O button (top on the left) for 30 seconds. Release after you hear a beep and press M (lower left)
Scroll through the messages untill you reach the Reset Std message.
If you have used oil according to quality sheet 229.31 or 228/229.51, you can scroll to Reset.31 or Reset.51 respectively.
This selects the oil type used.
Now, when appropriate oil type is selected- press 0 for 6 seconds untill ''2'' is displayed. Press O once again briefly and the ''done'' message will confirm that the job is finished.
This work on 08 model some times you need to do it more than once for it to work

SOURCE: i need the manual book for mercedes e270 cdi avantgarde model 200

how to reset the service light on mercedes benz e270 cdi avantgarde