Question about 1997 Lincoln Mark VIII

Open Question

How do i reset data error on a 1997 lincoln mark 8 LSC

I changed my cigarette ligher and now I have data error on my information station.Also my door locks,trunck,driver 1,2 seat preset don't work or my mirrors.Howdo I fix tis.

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

SOURCE: When my 2004 Lincoln Aviator

try the relays for it, they tend to tie several systems into one relay which could cause all those things to no longer work

Posted on Sep 10, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: The heater in my 1998 Lincoln Mark VIII LSC

You have a problem with your blend door actuator. Every year, twice a year, my husband manually moves the blend door actuator and puts a tie wrap on it so it will stay in either the heat or cool position. You can reach this through the glovebox, which you will need to remove. I had this fixed at the dealer once long, long ago - very expensive because the plastic piece that needs replacing means they must remove the seats and the whole dash area including the steering wheel to properly replace what is broken. If you want to see how that is done go here: http://www.mechanixtrix.com/Article/Article.aspx?ArticleID=145 Much easier going through the glovebox.

Posted on Dec 28, 2009

Ad
sandman357

cris

  • 236 Answers

SOURCE: i keep having my door ajar warning on the drivers

spray your door lock with dw40. sounds like the sensor in your door frame is not making correct contact. look on your door frame. all door frames. and see if you can spot any torn rubber or anything that could cause the sensor to not correctly close

Posted on Feb 23, 2010

Anonymous

  • 1 Answer

SOURCE: 96 lincoln mark 8,Door Ajar,cannot reset clock

my 96 mark VIII was running great, and now it just cranks and cranks with no start. please help

Posted on May 03, 2010

leeh

  • 1 Answer

SOURCE: I have a 1997 lincoln mark viii lsc has no tail

you need to replace the scil module, ie steering column ignition lighting module... also check all the fuese to the scil, in the inside fuse panel there are multiple fuses that control the scil and the lights. the response you got above is not from a lincoln mar viii owner, the scil is a common problem

Posted on Jan 02, 2013

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Lincoln Mark vii speedometer not accurate


Output shaft speed sensor problem.

Lincoln Mark VII Maintenance & Repair Questions - CarGurus

www.cargurus.com > Questions > Lincoln > Mark VII
CarGurusJohnny asked a 1988 Lincoln Mark VII LSC Maintenance & Repair question about a ...nicolse7 asked a 1992 Lincoln Mark VII Maintenance & Repair question ...

Sep 08, 2015 | 1992 Lincoln Mark VII

1 Answer

1998 Mark 8 LSC collectors series car. Where is the air suspension control module?


The air suspension module is located on the RF kickpanel. It is the black module with 2 connectors going to it. One black and the other white.
air-suspension-control-module-1998-mark-hohsqb5cqdswcx1wahyyf1rv-4-0.jpg

Jun 10, 2015 | 1998 Lincoln Mark VIII

1 Answer

When I changed my cigarette lighter in my 1997 Lincoln mark 8 my power locks and trunk stopped working and my information station has data error.How do I reset it.


If you didn't disconnect the battery before changing lighter you may have shorted something out.
Try disconnecting the battery for a while. some cars have capacitors that keep the computer memory so give it about an hour to be safe.

Jun 10, 2015 | 1997 Lincoln Mark VIII

3 Answers

I was given a 97 lincoln mark viii lsc that was broke down. Compression tested all 8 cylinders which revealed zero psi from all. Water in oil and cylinders are partially full of water, why?


Zero compression, engine is shot. Blown Intake and head gaskets can let water in the pistons, But usually not all would have water. Intakes can dump water in the oil also.

Jun 07, 2015 | 1997 Lincoln Mark VIII

1 Answer

Does blend door actuator once changed in 1997 lincoln mark 8 require reprograming?


no,it should work ok,,if it is not,the blend door itself maybe the problem not the actuator.

May 31, 2010 | 1997 Lincoln Mark VIII

1 Answer

1997 Lincoln mark 8 reset air bag light? blinks randomly


Ithink is a reminder that you have a problem with the air suspension.

Sep 01, 2009 | 1997 Lincoln Mark VIII

1 Answer

1991 Lincoln Mark VII LSC spark plugs and wires


you don't have to worry about a special tool if you are replacing the wires but you will need a 5/8 socket with a rubber boot and an extension and maybe a swival to remove the plugs if there is an auto zone near by they will print you out a diagram for free

Jan 07, 2009 | 1991 Lincoln Town Car

1 Answer

1998 Lincoln Mark viii Transmision Pan Torque Specs?


not needed just use a 1/4 inch drive just a bit over hand tight if u need the spec it is 25 inch pounds

Jul 16, 2008 | 1998 Lincoln Mark VIII

Not finding what you are looking for?
1997 Lincoln Mark VIII Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...