At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is integrated in your entire electrical system of your vehicle. the only way to bypass is to get an aftermarket alarm with a bypass module which will require an additional ignition key (which is inserted into the bypass module).
The security system considers low voltage a threat to the security of the vehicle. MAYBE, just maybe the gauge not reading the voltage correctly is causing the security system to shut you down. 2 options: Fix the gauge and hope that allows the secuiry to work properly OR bypass the security system so it CANT shut you down... The security light is an infamous problem on GM vehicles. They tend to NOT be tied into anything other than the ignition, TDM computer (theft deterrent module), starters or injectors. But anything is possible on new cars. I'll tell you what, bypassing that security system is a gauranteed way to get that car running again. Only takes about an hour as i have done alot of these personallly. This site has tons of info and ive done both different bypasses decribed on this site and they both work. Pending on your vehicle's system.
If you are handy with vehicle electrical, you can apply ground to the factory disarm wire, to permanently disarm the factory security. It's location and color;
Factory Disarm
Purple/Yellow (-)
in Driver's Kick Panel---Black Connector
vats can be bypassed by locating wires from key lock cylinder under dash. this is common problem with this type of system. you must determine resistence valu of key resister and cut wires ind solder replacement to ends of wires that go to vats module which is seperate from ecm module.
Try hooking the security system up again so that it's functional, then take out the fuse that's located on the fuse box in the trunk that's associated with the security system. It should be labeled "theft" and it's a 10amp fuse. The system will still function as normal only the horn will not sound if the security system is tripped and it will not shut down the fuel pump.
hi you cannot usualy bypass the security system, some cars have a way to turn it off but you require the key to do so.. the best way to fix is have a dealer program a new key
×