2001 Saturn L-Series Logo

Related Topics:

A
Anonymous Posted on Oct 19, 2014

Left brake light will not work when lights are on. Brake lights work when headlights are off

Replaced all bulbs and attachments

5 Related Answers

Anonymous

  • 3940 Answers
  • Posted on Jun 08, 2008

SOURCE: Brake Lights

The brake lights are engaged by a switch when you press the brake pedal. It is a plunger type switch, then when released, turns on the lights.

It appears that the plunger is not extending and making the connection. Try press on the brake pedal with one hand, and plull out on the switch plunger, see if the lights come on.

You should be able to replace the switch for less than $10


Ad

Anonymous

  • 3940 Answers
  • Posted on Sep 05, 2008

SOURCE: 2001 pontiac sunfire with no brake lights

If the light in the spoiler works, the switch is good. Sounds like a bad ground to the light sockets

Anonymous

  • 3 Answers
  • Posted on Dec 25, 2008

SOURCE: tail lights and brake lights not working with headlights on

We had the same problem with ours, that is a Saturn recall items. Check with your Saturn dealer to see if it is still in effect. It use to make our headlight switch get hot. I think it was a poor ground in the taillight housing, I use to wiggle the bulb plug-ins and that helped for a while, but after the recall was fixed it never did it again.

Anonymous

  • 5158 Answers
  • Posted on Feb 05, 2009

SOURCE: when pressing brake pedal headlights dash radio lights flicker

have the output of the alternator check... and perhaps the battery posts may need cleaning as well.

Robert

jturcotte

Jeffrey Turcotte

  • 8991 Answers
  • Posted on Sep 18, 2010

SOURCE: 2004 saturn Ion both brake lights but the top

Check brake light relay in relay box under hood. Relay should click when brake pedal is depressed. See my tip at http://www.fixya.com/cars/r6022358-relay_check

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
3answers

Headlamps on, both brake lamps are on;hit brake, left brake lamp brightens, right lamp remains dim;headlamps off, hit brake, only left lamp lights. What could be the problem?

Your right brake light is not the same bulb as your rear running light that comes on with the headlights. Different bulbs. Your right brake light is simply burnt out or has worked its way out of the connection. Take it to Advance Auto Parts. They may even change it for you. Not a big problem.
0helpful
2answers

Turn signal and brake light not working.

Change the bulb.The bulb has two lights.Running,and brake light turn signal.Its the bulb
1helpful
2answers

Third brake light on '01 Jeep Grand Cherokee not working.

check the light socket it could be lose on the wires or just the light
0helpful
1answer

Headlight switch on makes tail light dim

there must be a short circuit which powers tail lights and brake lights. probably you have a dual filament bulbs which have both brake and tail light together. check for bulb, socket/or bulb housing and harness of that light.
2helpful
2answers

I replaced a cracked rear tail light with an after market new light. Now the brake light won't work but reverse lights and directional signal do. The bulbs are fine as I've moved them around and...


  • If there are no brake lights period the check the stop switch (brake light switch)
  • This is attached to the upper part of the brake pedal itself. Should be a little wire off of it. When that goes bad the brake lights will not work at all.
  • Please note that the fuse for "brakes" is ABS only and has no bearing on the brake lights themselves working.
Regards, Tony
0helpful
2answers

When headlight are on and hit the beake pedal only the 3rd brake light comes on the rest are stuck . When i release brake pedal it seems like i am driving with my brake light on . but my headlight off...

It may sound silly, but check your brake light bulbs to see if they have been installed incorrectly. Brake light bulbs have two filaments, one for tail light, and a brighter one for brake lights. On some cars if the bulb is installed wrong, the brighter filament will stay on for tail lights. The only other thing I can think of is the wrong bulbs have been installed.
0helpful
2answers

Left brake light stays on constantly when headlights are on. When headlights are off, left brake light is dimmer than right brake light when brakes are applied. I did recently change the brake bulb. ...

There is a shortage some where at the brake bulb and low beam holder. Take off the bulbs and inspect carefully those losing wires attached to the ends can cause the problem. Good luck.
1helpful
1answer

Brake light, reverse light and turn signal issues

Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.
1helpful
1answer

Dash lights, tail lights, brake lights, not working 1965 mustang

Probably either a bad ground (broken wire, rust) or a bad headlight switch. The brake light circuit goes from the stop switch (Located up above the brake pedal) through the headlight switch, through the light bulbs to ground. The tail light circuit goes through the headlight switch, through the bulbs and to ground. The only things that are in common are the headlight switch (Is this the switch you replaced?) and ground.
Not much, but hope this helps.
Have a super day!
Ron
0helpful
1answer

Right tail light not working when pressing brake w/ lights on.

There should be at least 2 bulbs in the light assembly. One light is the light that is on when you turn on your headlights with out the brake pressed, the other light only lights up while you press on the brake. Make sure you are replacing the correct bulb. You may have been replacing the bulb that stays on. Your lights may be set up to turn off the light that stays on when the headlights are on while pressing the brakes.
Not finding what you are looking for?

92 views

Ask a Question

Usually answered in minutes!

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...