Reset code radio for Mazda5

More then likely the coiled ribbon electrical contact under the steering wheel is defective, it is called the "clockspring" contact.

If the code would have been due to the cap problem then the code will go away. Try resetting the code. Also try diagnosing again after disconnecting the battery and then reconnecting it after a few minutes.

All fuses are listed in the owners manual.

Rabindra Robinson this is not an answer of how to reset srs!!! Be11end!!!

I have the same problem on my 2006 mazda5. I go a new O2 sensor. Now I get p0131 and p2096 codes

mazda5 2006, started to not start, will crank over then dies out? could this bea starter? doesnt have loss of battery power? all the lights and radio turn on, jsut when i start it sometimes the engine comes on then will stall... thanks in advance.

FOR CODE P2106 (INTERNAL ENGINE OFF TIMER PERFORMANCE) THE FLOW CHART WILL LEAD YOU TO BELIEVE ITS THE PCM. THIS WILL PROBABLY NOT FIX IT. FIRST CHECK TO SEE IF NON FACTORY SPARK PLUGS HAVE BEEN INSTALLED. IF THEY HAVE THIS IS MOST LIKELY THE CAUSE.THEY WILL PRODUCE INTERFERENCE THRU THE COIL WIRING AND CAUSE THE PCM TO THINK THERE IS A PROBLEM. SIMPLY PUT FACTORY PLUGS BACK IN ENGINE AND CLEAR CODES.PROBLEM SHOULD BE GONE.I HAVE BEEN THRU THIS. SID CODESPOTI (SERVICE MANAGER)STOKES MAZDA, CHARLESTON,SC

http://www.youtube.com/watch?v=GKhVXslh6Is

Check this video for the location ... Check the location where they show and let me know if you find it...

call the dealer see what they recomend

how can i fix 2006 Mazda5 if the Diesel Particulate Filter is not working.the sign DPF is always blinking when i turn on the engine.