20 Most Recent 2006 Mazda 6 Questions & Answers

See the D on top of the duct between the blower and the core?


2006 Mazda 6 | Answered on Feb 03, 2019

2006 mazda 6
That looks like an issue with wiring. You can fix it through reliable-store.com
Wiring, schematic, electrical diagrams etc are basic contents of these online books they sell here on this website link I have attached. Must check it out, it'll surely help you

2006 Mazda 6 | Answered on Dec 25, 2017

have u checked ur spark plug leads and spark plugs it all so be ur injectors

2006 Mazda 6 | Answered on Oct 08, 2017

U must find out why the starter is not cranking to start the engine. Have you checked battery terminals for cleanliness and lack of corrosion? Starter terminal wire good and solid? Solenoid any good? Connections? Relay issue?

Try getting a schematic so you can trace it out and find source of anomaly.

2006 Mazda 6 | Answered on Sep 03, 2017

Is the proper amount of Freon in the system? Check the relays, high pressure & low pressure switches, fuses, electrical connections in the system. good luck

2006 Mazda 6 | Answered on Aug 02, 2017

Could be a front tire rubbing up against part(s) of the wheel well. Are you using the correct size tire up front?

2006 Mazda 6 | Answered on Jun 12, 2017


Click on the link.
I can only help by telling you to check voltage and ground circuits. You check voltage by using a test lite, see the fuse in diagram, not only check the fuse, check the fuse circuit for voltage.
To check ground, you can still use the test lite, one end comes from voltage, the other end you touch to ground wire, the actual wire not the insulation, if the lite comes on, at least you know the ground is good enough to turn on the lite.
You can see voltage wire color coming from fuse. The ground wire not in the picture, black with yellow tracer.
on the hinge side of driver door is usually a wiring harness going into the driver door, probably has a protective covering, move cover back far enough to find the wire colors you want to check.
You open/shut driver door so much, sometimes those wires may break?

2006 Mazda 6 | Answered on Apr 16, 2017

It could still be the battery, if it has a weak cell and depending on how weak it is, it may or may not show up on the test. Get a battery with a higher cold cranking amps than the one you have now. If there is no other problem that should cure it.

2006 Mazda 6 | Answered on Feb 26, 2017

nope the mazda is obd2 as well, the problem lies in compatibility with the reader your using to recgonise the ecu

2006 Mazda 6 | Answered on Jan 25, 2017

Not finding what you are looking for?
2006 Mazda 6 Logo

473 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Mazda 6
2004 Mazda 6

738 Questions

2003 Mazda Mazda6
2003 Mazda Mazda6

453 Questions

2005 Mazda 6
2005 Mazda 6

383 Questions

2007 Mazda MAZDA6
2007 Mazda MAZDA6

74 Questions

2008 Mazda MAZDA6
2008 Mazda MAZDA6

48 Questions

Top Mazda Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MAZDA6 Mazda

  • MAZDA6 Mazda

Most Popular Question

remove right drive axle

  • Cars & Trucks