I changed the braklight switch
Make sure your brake light are 'really' coming on when you press the brake. You can also take the plastic housing, around the shifter handle, up and using a screwdriver move the locking pin out of the shifter shaft.
SOURCE: Landrover discovery wont start but battery is good
This usually is the starter, especially if your truck has had an oil leak going for a while as the oil will run down into the starter and cause it to intermittenly fail. Also check your battery terminals and make sure you have a good connectivity.
SOURCE: need head bolt torque settings for 200 landrover discovery 4.0 liter 241 cu.in.
Stage 1 20nm
Stage 2 +90 degrees
Stage 3 +90 degrees
SOURCE: 2000 landrover discovery II ABS light, tracking light are on
a housing gasket is causing the antifreeze leak thats not a big problem to repair ,but the dash light are another issue and without the right connection cable and software programme to sort out the lights i would suggest the main dealer .
SOURCE: i connect a 1997 landrover discovery computer to the 1994 landrover discovery and it won't start.
if it is a mems unit , it will need to be programed to the key fob and alarm . (there is no way round it).
SOURCE: landrover discovery auto gearbox position
yes it is common. but first have your battery tested, that some times causes the s&m lights to flash throwing a xyz switch fault
99 views
Usually answered in minutes!
×