There is a clip to release on the wiper blade itself
SOURCE: Wipers Blades stay UP when in the off position
As far as the wipers staying up this is a common problem with them. I have a 2002 that had the same problem. There is what they call call a park tab that tells the wipers where to park at when they are turned off. Technically the tab should be replaced however I got by with heating it up and bending it back into the shape it is suppose to be in. You have to remove the cowl below the windshield to get to the motor which is where it is located. I would say the skill level required for this repair is at least a 3 on a scale of 5 being most difficult
SOURCE: 2003 pontiac bonneville wipers wont shut off
There is a TSB (Technical Service Bulletin) for this problem, consult GM for more info. It simply regards the wiper module cover assembly that has been problem atic in most gm vehicles. Your best bet though would be to remove the cover and look for any signs of moisture intrusion, or broken circuts. If you find a broken circut and are handy with a solidering iron, you may be able to fix this problem. If there is any evidence of moisture, you may want to try to dry the unit out and see if that makes any difference. Normally though this problem ends in replacinjg the complete wiper module cover assembly. Here is where that item is located.
SOURCE: 2003 Pontiac Grand Prix GTP Rocker Panel Issue
There are some awesome adhesives on the market. I am thinking about one for boats and just remember "1500" as part of the name. With marine products you will not have any problems with moisture separating it so car washes will be okay.
SOURCE: the wiper arm came off of my 2004 pontiac grand
If it's the blade arm it's generally always best to replace it new and will come with new fasteners.
If it's the assembly arm itself depending upon how it was broken off you may need to replace assembly the arm from the stem complete with new / serviceable used bracket.
SOURCE: have a '04 pontiac grand am. wipers work occasionally
on your signal switch,wipers there all attached together,one goes you need to change the whole thing
29 views
Usually answered in minutes!
×