I accidently locked my keys in my grand vitara help!!

It would surprise me if the car didn't require a chip in the key being a 2006 model, the reason it works on the door is because the door lock doesn't have the chip reading equipment which is fitted to the ignition system, it relies purely on the lock tumbler, the key will fit in and turn the ignition but the car won't start

Remove key from ignition switch.
Close all doors.
Open drivers door
Insert key and turn to ON position and within 10 seconds turn key off and remove key.
Within 20 seconds Close and open drivers door 3 times.
Insert key and turn to ON position and within 10 seconds turn key off and remove key.
Locks should now lock and unlock automatically to confirm you have entered programming mode.
Press the UNLOCK button on remote and locks should cycle to confirm programming.
Repeat step 8 on each additional remote.
Exit vehicle with keys and remote, close door test remote(s).
And I personally suggest you find a professional key fob installer in your area. he will help you properly
Thaks

did you follow the books steps carefully
and read the rules on key counts
the book , operators guide tells all this, rules and DIY key learning,

lost the book , its free at Suzuki
or $4 here
USA only
RTM
https://suzukipitstopplus.com/Products/1044-2006-grand-vitara-owners-manual.aspx

most cars, have a kids anti tamper device.
did you look at it first?
is this door. lacking a key slot?

see here for both books
operator guide if lost. its was in the glove box day1.
or here
https://suzukipitstopplus.com/Products/1056-2004-grand-vitara-grand-vitara-xl-7-service-manual.aspx


operators guide (all are usa books)

https://suzukipitstopplus.com/Products/1055-2004-grand-vitara-xl-7-owners-manual.aspx

Remote can be matched manually

don't have 2 fobs?
it cam with 2,
and the battery must be good.(for buttons to work on fob)
never run any car with only 1 fob or one key.
or get locked out.
are you saying the metal cut key end (pure mechanical ) failed?

my car has a real key with a a transponder inside .
it can open 2 ways, the keyfob buttons, (takes a good battery)
and the key metal end.

get a spare fob and program it.
http://blog.keylessentryremotefob.com/2013/07/2008-suzuki-grand-vitara-key-fob-remote.html

now you have 2 like you should.

most newer vehicles will not lock the door with the keys in the ignition and/or the keyless start remote fob in the vehicle. Vitara has a small button on the handle that will unlock the door if you have the fob in your pocket if the fob is in the car it can"t be secured since it is set up to unlock when the fob is within a couple feet of the vehicle. I know this is a late post for your question maybe it will help others

Not a car expert but have some common sense advice---is it possible the vehicle was re-keyed before you got it? Someone may have lost the original keys and resorted to just using the other feature---a year is a long time not to know about this---I should not talk as recently got a vehicle where owner said rear window would not open for last two years=that vehicle has child safety locks on rear doors that also disable windows--needless to say nothing wrong.

I would talk to Suzuki if the key box is a factory installed item to see if it has a way of locking the physical keys out.

Worth asking---if after market item it may have been installed in a way that causes this issue.

Hi.
There is no way of changing 2 press into 1 press. For unlocking all doors - press the remote 2 times.

xl-7 programming instructions first you need to stuff your head up under the dash and locate your module drivers side upper corner under dash does it say programmable transmitter (the first models had no programable modules) if it says that then......
1 confirm all doors are shut and key is out of ignition
2 open drivers door insert key and turn to on within 10 sec
3 turn ignition switch to off in 10 sec
4 push and release drivers door switch 3 times in 20 sec
5 turn ign. switch to on in 10 sec
6 turn ign. switch to off in 10 sec
7 press and hold lock and unlock button on transmitter for 5 sec within 20 sec of step 6 alldoors will lock/unlockto confirm correct process
8 press lock unlock buttons on second remote within 5 sec after step 7 once again all doors will lock/unlock to confirm
9 to add another remote up to a max of four repeat steps 1 through 8 this was taken directly out of an owners manual supplement that comes with a new keyless entry kit (part number for a xl-7 or grand vitara can't remember which one it goes to but it works on either one is 84900-67810) which you would have to purchase if yours is not programable these instructions are the same for vitara, grand vitara, xl-7 and the esteem hope this helps