I need a diagram for serpentine belt replacement for a 1999 Ford Escort
Go to gates.com and click on the Part Locator & Interchange link on the left, enter your vehicle information, look down and click the camera icon next to the serpintine belt, this is a diagram of how to route it. These engines have a tensioner pulley, it has a 3/8" square drive hole in it to release the tension on the belt, I start at the crankshaft and loop around leaving the tensioner for last, hope this helps, let me know
SOURCE: serpentine belt replacement
2.0L Engines
See Figures 11, 12 and 13
The
accessory drive belt for 2.0L engines has no provision for manual belt
adjustment, since these engines use an automatic belt tensioner. Drive
belt slack is taken up by the automatic tensioner.
Movement of
the automatic tensioner assembly during engine operation is not a sign
of a malfunctioning tensioner. This movement is the tensioner
self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C
Fig. 12: Drive belt routing-2.0L SOHC engine without A/C
Fig. 13: Drive belt routing-2.0L DOHC engine
SOURCE: I need a diagram for serpentine belt replacement on a 1999 For Escort ZX2
the diagram is located in the engine compartment under the hood.
Clean off the surfaces and it is one of the stickers there.
SOURCE: need to replace the serpentine belt on Ford Escort
Here is the diagram i made in paintbrush, not the best, but it will get the job done. I didn't have a diagram on mine and just had to figure it out. And that not fun with the room you dont have in there.HOPE THIS HELPS!
389 views
Usually answered in minutes!
which engine there are 2
×