How can I reprogram a Mazda 6 2002 remote? I've

SOURCE: My 2003 Saturn Ion remote trunk release won't

Check to make sure the button on the trunk latch is turned from manual unlock...they made that feature so only the key will work to open the trunk that way if someone breaks in the front of your car they can't hit the trunk release and get into the trunk...may be the same thing for your remote. Hope that helps.

SOURCE: whats wrong with my car remotes? 2003 mazda 6

sounds like keyless entry module failure or PJB box failure wiring check required

SOURCE: My remote stopped working, I

have remote checked out at advance auto,could be ur keyless entry sensor bad

Testimonial: "awesome"

SOURCE: remote locking 1999 prado stopped working

try this see if it works ( should do )

you have 15 seconds to perform the following 3 steps:

1. All doors closed. Key not in cylinder
2. Insert already registered master key in the key cylinder
3. Turn ignition switch from the LOCK to ON position 5 times
then
Within 20 seconds, Open and Close the driver's door 6 times
then
Within 10 seconds, remove the master key from the key cylinder.
then
Within 10 seconds, insert the key to be registered into the key cylinder
then
Keep the ignition switch at the ON position for 60 seconds or more

Remove key

Open and Close the driver's door once

End of procedure

other than that take it to the dealer GOOD LUCK

SOURCE: 1999 toyota 4runner keyless remote doesn't work

Check with a Toyota dealer for your info