Reset fault lights on discovery 2

Hi welcome main problems are the abs valves causing the 3 dash lights (search 3 amigos online) a really badly sited compressor can cause air suspension models to fail giving the bags a slow leak the V8 is a solid engine but can have radiator expansion tank and cap failures
the other issue is electrics windows and door looms are problematic

shuttle valve,70$ on ebay, get rid of the three amigos .

This can be due to the possible reasons as follows:
1. Fault in the door switch , rocker switch contact being faulty.
2.Fault in the wiring harness that has snapped at the door hinges section.
3. Fault in the winding motor., remove and check for forward backward movement.
4. Mechanical jamming of the winder, remove and reset if there is tightness in the glass channel.
5.Fault in the electronic circuit/ load trip off circuit.

For valuable info re: your info, check Landroversonly.com forum - it's commonly know as "3 amigos" and for reference sake - download this (RAVE manuals) Ot's the Land Rover bible (FREE)

http://www.landroverresource.com/

i have same probleme with my land rover, this trouble is intermitant wath can i do abs light traction control andhill descent if you have he ansher for me [email protected] thank you

Code P1590 is a rough road/ABS fault that normally will also show up when the ABS is having problem with the lights coming on and off or on all the way. Only indicating the the 3 Amigos are on or come on go. Fix you brakes and then you can clear the code.

It can be clear with a proper scanner and is not being caused by any other ABS part.

Check the troublecodes.net/landrvr for other details.

Hope this help (remember rated).

you've got a bad wheel speed sensor or corresponding tone ring. take it to a dealer. they'll hook it up to a computer and tell you which sensor or tone ring it is and give you an estimate. you only pay for the hour of diag.

Hi,
In Td5 circles this problem is known as 'the 3 amigos' !
One of the causes is a faulty abs sensor, the abs sensors let the ecu know what 'speed' each wheel is doing and thus control the abs, hd & tc.
Check that the wires to each have not been damaged and that the plugs are firmly in as apart from 'off road' damage it is possible that something happened when the brakes were getting worked on.
Another cause can be the wheel bearings....
If there is nothing obvious then get it plugged in as said in previous answer and this will tell you which wheel is giving the problem.
Hope this helps,
Iain

probably the shuttle valve in the ABS unit is defective, solution renew shuttle valve, dont let dealership sell you a new ABS unit very expensive

its the abs sensors which are part of the front hub/wheel bearing assembly get the lights reset by a dealer if it happens again u will need 2 renew one or both of the hubs £200 per side tho!