Cars & Trucks Logo

Related Topics:

doug bystrom Posted on Mar 29, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1993 chev z71 wont start

Turns over,has spark and fuel.tried ether and poured gas in tbi but nothing

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

  • Expert 193 Answers
  • Posted on Mar 29, 2013
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Joined: Mar 26, 2013
Answers
193
Questions
0
Helped
46365
Points
616

Check for a shorted sensor. Try disconnecting the coolant temp sensor, they ussually go bad creating these problems (even when the gauge works fine). Also, you can check ignition timing.

5 Related Answers

Anonymous

  • 94 Answers
  • Posted on Nov 30, 2008

SOURCE: injectors are not putting fuel into the TBI and eng wont start

Two things can cause that # 1 is the module in the distrubtor # 2 is the ECM.

Ad
Rickygittins

Ricky Gittins

  • 715 Answers
  • Posted on Apr 28, 2009

SOURCE: 1997 chev. suburban new fuel pump and regulator WILL NOT START

Check fuel pressure and fuel flow, If the pressure is lower than what is recomended injectors will not function correctly , no start condition (trys real hard though)

Woody J Hiatt

  • 306 Answers
  • Posted on May 07, 2009

SOURCE: S10 won't start after it rains. Replaced fuel

Dump the gas in the fuel tank

Anonymous

  • 1486 Answers
  • Posted on Jul 24, 2009

SOURCE: 1992 Suburban wont start, but sounds like it wants to

clean the jets in the carb.Your not getting fuel.Also check the timming has not slipped.good luck hope that was help full.

Anonymous

  • 1 Answer
  • Posted on Aug 01, 2009

SOURCE: 88 dodge dakota 4x4 3.9

i have a dodge dakota 88 pick up 4x4 and its is automatic and whin i put it in drive the 1st gear the rpm go sky high but the truck berley moves untill it rech 2nd so wut could it be replie at [email protected] or call at 704 772 6205 thanks

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 2000 gmc w3500 gas motor that has spark and fuel in the fuel bar but wont start,,and even if i put ether in the intake it won't start

How is fuel pressure? He must try to start with ether, If you turn crank by hand forward and backward you feel how much play in timing chain?
0helpful
1answer

My 1988 chevy S10 4.3L 4WD has a fuel problem. I have to turn the ignition on and off about 5 or 6 times (like priming it) before the truck will start. I can pour gas into the TBI and it will start...

fuel inj. sys. is looseing pressure when shut off . there is a check vavle that stops this . I'm just not sure where it is on that vehicle . check with a chev mechanic . Good Luck
0helpful
1answer

1988 chevy 5.7 wont start

that says you are getting gas but spark,start from spark pugs and trace it back to coil, if every thing is OK to that point,trace it back all the way to ignition swith in the steering column
0helpful
2answers

1988 chevy S10 turns over but won't start getting spark put in new fuel pump,cpu and injector. If I pour A little gas in throttle body hole it will fire for a few sec. fueses all test good.

Hello, just had this problem myself. Check your EGR valve by pulling the vacume line off and pushing up under the valve put your finger over the vacume line hole and release the valve, if it returns to normal position then its bad if not its good. If its bad it needs replaced. Mine did the exact same thing and thats what it was. Hope this helps
0helpful
1answer

1990chevy suburban 2500 350 died while driving and won't restart I can hear the fuel pump turn on I have changed the fuel filter and still nothing what's next

check for spark, no spark, no fire engine wont run, possible bad ignition coil, wire from coil to distributor cap, no power to ignition coil from ignition switch (rare) wire broken to ignition coil (even rarer)
1helpful
1answer

88 chev,350, stick,2wd, 3500, gas flows to

E.C.M control injector pulsation, with key on check for voltage at injector harness, then reverse test light at battery and check for ground at the other wire at injector harness, crank engine ground should have pulsation if none bad E.C.M,good luck,hope this was very helpful.
0helpful
1answer

I have a 1993 chevy s10 4.3l TBI that will not start.

Make sure the injectors are pulsing. Whatch to make sure mists oj fuel are coming out.
0helpful
1answer

I have a 98 k1500 with 5.7 350 and it wont start, has spark and fuel at the tbi but the injectors wont fire, will run on ether if sprayed down the tbi any ideas

have the fuel pressure checked ,im assuming it is a vortec,
you need about 55 psi continusly to keep it running, i have a 96 2500 sierra. the fuel pumps were known to be terrable in these trucks. i put a new one in, then had to remove it to replace it again amonth later, they are flawed by manufacturing design.
Not finding what you are looking for?

159 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...