Front blower fan works sometimes and then stop working.
SOURCE: how to replace the blower motor fan assembly in a
Blower Motor
Removal & Installation
Delphi
Blower Motor Replacement (Delphi)
To Remove:
To Install:
Visteon
Blower Motor Replacement (Visteon)
To Remove:
To Install:
SOURCE: The Heater fan in my 2003 GMC Yukon XL will not turn off
I don't know if you already fixed it, but I had the same problem on my 03 yukon, TysonRicky is right. In my case it was the blower control module. You can find it right under the glovebox. It cost me close to $100 for a new one, but very easy to replace. Can't even imagine how much it would've cost me if I had a mechanic do it.
SOURCE: 2005 Yukon XL, third brake light intermittent
Remove bulb, make sure it sits tight in the socket. make sure socket is not burnt up (brown or black in color) Check bulb, if the filament inside is loose or discolored, replace as nesessary. Check brake light switch under driver side dash above brake pedal. make sure it is adjusted correctly.
SOURCE: 2003 GMC Yukon XL All gauges on instrument panel stopped working
I had to replace the entire instrument cluster. It was covered by the warranty.
SOURCE: 2006 GMC Yukon Denali XL Rear Hatch & Glass locks not working
Could be the latch mechanism for the door is sticking. You could try using some white grease on the latch and the contact where the latch hooks to. You can purchase the grease from most auto parts stores. You will not need to use alot. Just apply a small amount to the mechanisim and then work it in using the manual handle. Then open and close the door several times to feel the "action". Then apply a little more and repeat. This should loosen the latch and get it working again. Also make sure that none of the tension springs have come loose on the latch. And check the seal around the door and make sure it is not pinched and has a proper fit.
900 views
Usually answered in minutes!
×