Radio pin code
SOURCE: reading coder on toyota echo
I am sorry but no, there are different codes some are P codes, some are B codes, and there are other ones, OBD 1 (84-96) systems could flash the check eng lite and give you codes, but they were just two numbers like 12. A typical OBD 2 code is like this P1546, this is a emission code. Kragen auto or any of the chain auto parts stores will read the codes for free.
SOURCE: Toyota Echo Radio Code Help - 2000 Model
Go into Toyota and take your registration with some form of Picture ID and for a fee they will be able to get you the code for that radio. Good Luck
SOURCE: i changed the battery on
if you have the service books there should be a card with the code. if you dont you need to go to a toyota dealer the can give you the code they need full details of car
SOURCE: How to....remove radio sepakers (rear) from a Toyota Echo??
It's really easy to remove the rear speakers. First, get in the trunk and find the 3 white anchors for the rear deck-they're near the rods for the trunk mechanism. Push them through the metal frame to free the deck. Next, you have to get in the back seat and remove the stop light from the deck. To do this, push in the pins on the locking mechanisms on either side of the light to free the back casing. Pull the pins out and the casing off. Next, undo the two bolts holding the stop light in place and pull it off-don't forget to undo the wiring harness. Next, find the three anchoring points for the back seat. Gently lift the two side ones free of their anchors. This gives you access underneath the deck. Free the deck and gently lift it over the seat. You'll have to jimmy it a little to get the locking clamps free--they're all along the back of the deck. Pull it free and you have access to the speakers. I believe the factory speakers are 5 1/4 inches
Try to use Toyota speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon.
cheers
258 views
Usually answered in minutes!
×