Sometimes and getting more frequent, when I go to start my truck it will turn over and crank for about 4 seconds before it will start, or it will just kinda stumble on itself kinda like you did not hold the key over long enough. Please Help the dealership is giving me a hard time. Thanks
The ford dealership has my truck now, they said it was the injectors leaking and not holding gas in the fuel rail for start up, and that would also fix the sputtering problem i have. I will know for sure no later than wensday 2/4/09 if that fixes the problem. I will post the results when i get my truck back
Posted on Jan 31, 2009
We Just bought a used 2006 ford f250 xlt and the horn doen't work. Problem is we can't find where the horn is located on the truck to fix or replace it. Is there fuses also? Thanks
________________________________________________________________
The cause of this is not the horn or fuse in most cases, it is caused by the rotating contact that connects the horn button, in order to repair this you will need a new clock-spring contact, to install the airbag must be disarmed, his has to be done by the book or serious injury can result.
Posted on Nov 11, 2008
Ford 2006 F150 5.4L transmission fluid. Book says there should be 13.9 quarts of transmission fluid. When drained there is aprox. 3-4 quarts. Anyone have the capacity for this transmission.
you must have just drained the pan? There is much more held in the converter. The one I am rebuilding this week is an 05 and doesn't have a drain plug on it (not many do anymore). A flush is the only way to change it all out. 13.9qts sounds like the total amount if the trans was completely empty, converter and all
Posted on Aug 13, 2010
which fuse is the cruise control on a ford f150 2006
it in manual free from ford
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
Posted on Jul 07, 2009
ac orifice tube location on 2006 f150 4wd 5.4l
Check the lines coming out of the condenser . One of them has a crimped spot,that is where the orifice is located. Good luck.
Posted on Aug 10, 2009
what is the 2006 f150 4.2L firing orderhad t ochange my spark plugs and wires but its not starting wanted t odouble check the firing order
For the 4.2L:
Firing Order:
1-4-2-5-3-6
Cylinders:
3----------6
2----------5
1----------4
(Front of Vehicle)
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Feb 20, 2010
Ford driver power seat wiring diagram
Not sure if it is just the power seats or the memory seats, so here are all of them
Hope it helps with what you have going on. Don't forget there is the issue with the broken wire in the drivr's side door sill that can cause power seats to stop working
Posted on Sep 11, 2010
what number is the fuel pump relay on 2006 f150 5.4
Hello! Box is located under the right side of the instrument panel...Guru....saailer
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
Posted on Nov 05, 2010
My 2006 Ford F150 driver side door sensor is not working. When I open the driver side door the interior light does not go on, and there is no warning sound to notify me that my lights are still on or the keys are still in the ignition. When the passenger door is opened the interior light does go on. Any suggestions on how to fix it my self?
I am a master ford tech and see this concern weekly ! more often then not its a dirty door ajar switch which is located in the latch in the door. get yourself a can of brake cleaner with a straw and a can of wd-40 from a parts store and install the straw in the brake clean now spray the latch liberally then close and open the door six to eight times,next spray the latch with the wd-40 liberally then close and open the door six to eight times, this more often then not will fix the issue. if not you may have a bad switch or a wire broken where the wires past between the body and the door (near the hinges) hope this helps
Posted on Dec 29, 2010
brakes are brand new - new rotors - full of break fluid - parking brake is completely up
Same problem, it's the fluid/parking brake light so you can't scan for codes, it shouldn't happen, just had the brakes done. The shop monkeys can't figure it out. Help.
Posted on Apr 18, 2013
1,590 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
974 Questions