2005 Toyota Previa - Page 9 - Answered Questions & Fixed issues
Over heating
Sounds like a bad water pump. If there's no white smoke coming from the exhaust (head gasket) and the radiator and thermostat are good, either the belts are slipping or the waterpump is on it's way out.
POSSIBLE PROBLEM WITH BRAKE LIGHTS. MAY NEED TO
Almost all fuse box in a vehicle is located on the left panel under the dash. It would have a plastic cover which should be esy to pop off. Sometimes it has a screw in lock. A blown fuse is usually easy to spot. If you find it, replace it with the same amp rating. brake lights usually are 15-20 amps
Toyota estima 2000 engin light
Chain sound? That's a first. If there's an auto zone or advanced auto in your area, they'll have the computer to read that error code for the engine light, and will save you about 60 bucks in having a shop do it for you. But if there is a sound accompanying it, chances are it's mechanical, and I really wouldn't trust driving it till it's looked at.
Chevy corsica struts replacement
you have to remove the stut from the caar install spring compressor screw and tight it you gonna be able to remove the shock good luck pierre
Front strut replacement
if it was me i would go to the local library and there you can get pictures and diagrams on your car .
How to check the oil
the oil fill and dip stick is located under driver seat .
There is a door with a black knob that locks and unlocks
Also there is a resvoir for additional quart of oil to seep in
as needed under hood by the battery. Good Luck These
Are GREAT TOYOTAS!!!!!
Toyota Corolla 1.3 Esteem 2014 model, I am having problems with the selection of 4th gear at certain times only,
no country told. Esteem is not really the true makers name.Called SUZUKI but.
no 1.3L here.USA
you said 4th fails but what about 5 and 6 gears?
this Esteem is a Toyota Corolla badge'd as Suzuki. << so manuals on toyota show this.
I think Corolla are listed as the most cars by brand ever made. so documents are easy. find and I did.
called the EC65 transmission.
well checking linkage problems is first and levels next.
it is twin cable complex shfit cable set. both end must be good, and adjusted.
the manual shows the calibration to the ends (the are threaded swivels), these steps are tricky and
not reading the manual will not ever be done correctly
if you run it low on GL4,? the box will be damaged.
why not have shop check it out. and do lube change.
missing parts are not good ever. these were not optional. there.
now inside the box what could be wrong. well
the shift forks are failing for 4th
the lever lever tip bad
forks bad inside box and or shift fork real detent balls missing, bad service cased.
or bad 4th gear lock up dogs or synro ring.
the car has service manual to read. that covers this transmission,
I found it. filler , level check in the FSM
"TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"
GL4 is what it is, the most common man. tranny lube on earth, used for DECADES now.
the manual is here
https://eautorepair.net/Checkout/ActivationPlan/2014/Toyota/Corolla
Need settings and sequencefor toyota 4y engine the big end and main bearings as well as top
no car told year, make or model the books on engines are by that. only
wiki said this.
OHV eight-valve
Displacement: 2.2 L (2,237 cc)
Bore and stroke: 91 mm × 86 mm (3.58 in × 3.39 in)
This engine was available either carburetted (4Y) or fuel injected (4Y-E, called the GW491Q/LJ491Q and also 4G22B for Chinese manufacture). As fitted to a 1989 Daihatsu Delta truck, the carburetted 4Y produces 70 kW (95 PS; 94 hp) at 4400 rpm (SAE net)[5] and 18.6 kg?m (182 N?m; 135 lbf?ft) at 3000 rpm.[6]
Applications
1987.09 - 1995.12 Toyota Crown (YS132, overseas specifications)
Toyota Van (Town Ace overseas specification, Tarago in Australia)
Hiace third generation (overseas specification)
1979-1988 Toyota Stout (YK110)[citation needed]
Daihatsu Delta
1993-1995 Daihatsu Rocky F95
Toyota Industries forklifts
Toyota 4Runner (Australia)
Volkswagen Taro
1985-1997 Toyota Hilux fourth and fifth generation
sorry nobody can guess the car or the country . nor the VIN.
2004 Toyota Sienna. Driver side sliding door problem.
It is not clear whether your key fob continues to work for the passenger side door. If it does not, you should replace the battery in the fob. Such batteries are available at Wal-Mart among the batteries. If the sliding door on the driver's side makes a noise but fails to open when you use the fob, the latch motor maiy have failed. If the cable in the side door has frayed and snapped, this would explain why you can manually open and close the door but the electronics won't move the door. And if while trying to close it manually, the door fails to latch properly, this is why you get an alarm. If the latch motor, cables, or any other components are malfunctioning, it could lead to the door not closing securely, triggering the alarm. Check your latch mechanism and cables. If you can determine the malfunctioning part and replace it yourself, that is cheaper than going through the dealer. Here is a service manual:
https://www.manualslib.com/manual/1061909/Toyota-Sienna-2004.html
What To Do When Your Sienna's Side Door Won't Open Or Close ' Toyota Parts Center (olathetoyota.com)
What is the engine torque settings for k3 toyota Avanza
Exactly which nuts and bolts do you need the torque settings for? Not all fasteners on an engine use the same torque setting. For example, a valve cover bolt needs a low torque setting where a cylinder head bolt torque setting will be much much higher.
If your rebuilding an engine it is usually a good idea to buy a good quality workshop repair manual which will have all the settings you need.
Not finding what you are looking for?