2010 Seat Leon 1.4 - Answered Questions & Fixed issues
MY DASHBOARD LIGHTS AND GAUGES WONT COME ON
It sounds like either a blown fuse, or a relay. If replacing the fuse, be sure to check all surrounding wiring and look for burned wire, loose connections, dangling wires, you should repair this problem before popping in another fuse. Good Luck
Seat Leon boot lid will not lock
I had this with mine .. You need a new lock fitted , they are electronic and like anything else they break . I managed to get the plastic back panel of the boot lid and get a small ratchet strap from there to the lashing points inside the boot to keep it shut..
I have a wobbling back end seat leon 1.9 tdi 2008 plate
wobbling from the rear end can be from worn suspension rubbers in the control arms. Normally it is from belt separation in the tyres and bulges in the side walls
I take it that it is a front wheel drive with no diff action at the rear.
another point may be that the rear brakes are grabbing ( out of round drums or warped discs) that is causing the vehicle to react as if the rear is loose.
Horn diagram/location
WHEN U PUSH THE HORN DO U HEAR A RELAY CLICKING?IF YES CHECK THE FUSE AT THE ENGINE COMPARTMENT NO 46 IF I REMEMBER.IF FUSE IS BLOWN THE PROBLEM IS AT THE HORNS PROBABLY DAMAGED BY WATER INSERTED.LET ME KNOW.
Head gasket change
Has is been properly diagnosed because it will be a very big job. You need to make sure the diagnsis is correct prior to doing it. How was it diagnosed?
2003 expedition heat/cool seats not working
All other seat controllers work. Nothing unhooked and fuses are all good.
The diagnostic process for the heating and cooling is a very long and involved process and requires a couple of specialized diagnostic tools that you may not have.
Here are some of the easier things to physically check, which can be preventing the proper function of the seats:
Mechanical
- Climate controlled seat ducts
Electrical
- Climate controlled seat ducts
- Fuse(s)
- Circuitry
- Driver seat module (DSM)
- Lumbar control switch
- Memory set switch
- Power seat motor
- Seat control switch
- Seat fan motor
- Climate controlled seat module
- Climate controlled seat switch
3/8/2024 1:45:01 AM •
Seat Cars &...
•
Answered
on Mar 08, 2024
•
28 views
John Deere 4600 shuts off when put in gear,
If your John Deere 4600 shuts off when put in gear, even after bypassing the seat switch, there could be several potential causes for this issue. Here are some troubleshooting steps you can take:
- Check the Neutral Start Switch: The neutral start switch ensures that the tractor can only be started when it is in neutral. If this switch is malfunctioning, it may cause the engine to shut off when you engage a gear. Inspect the switch for any visible issues and consider testing or replacing it.
- Inspect the PTO Switch: The power take-off (PTO) switch should be disengaged when shifting gears. A malfunctioning PTO switch could be causing the engine to shut down. Check the PTO switch for proper operation.
- Examine Safety Interlock Switches: There are often multiple safety interlock switches on a tractor, including those associated with the brake, clutch, and other safety features. Check all safety interlock switches to ensure they are functioning correctly. A faulty safety switch could shut down the engine when a gear is engaged.
- Battery Voltage and Connections: Low battery voltage or poor connections could lead to electrical issues. Check the battery voltage and ensure that the connections are clean and tight.
- Inspect Fuses: Check the fuse box for any blown fuses. If a critical fuse is blown, it could lead to a shutdown when engaging gears.
- Fuel System: Ensure that the fuel system is functioning properly. Check the fuel filter, fuel lines, and fuel supply to the engine. Lack of fuel flow could result in the engine shutting down.
- Engine Sensors: Modern tractors are equipped with various sensors that contribute to engine control. A malfunctioning sensor, such as a crankshaft position sensor, could cause the engine to shut off unexpectedly.
- Professional Inspection: If the issue persists after checking the above components, it may be advisable to seek professional assistance. A qualified mechanic or John Deere service technician can perform more in-depth diagnostics using specialized tools.
It's important to approach these troubleshooting steps carefully, and if you're uncertain or uncomfortable performing certain tasks, seek assistance from a professional. Additionally, refer to the tractor's manual for specific details about the safety interlock system and troubleshooting procedures.
11/19/2023 9:28:18 PM •
Seat Cars &...
•
Answered
on Nov 19, 2023
•
55 views
Not finding what you are looking for?