2010 Fiat Doblo 1.3 - Answered Questions & Fixed issues
How do i reprogram a key for a 2011 fiat doblo ?
There are mobile key cutting and coding businesses who will come to you, when I broke my only key for my Fiat Bravo they came to where I was stranded and cut and programmed two keys for seventy five pounds. It only took an hour.
Drive shaft noise
Usually inner CV joints will create a shake/vibration under load.If you can change the vibration at the same speed with load it may need inner CV joints.Grab them and check for side play/looseness in the each shaft to check.
Why won't the rear sliding door open completely?
check that the runners are in the correct position, sometimes they come loose. The top and bottom have to be aligned for the door to open fully. I have had the same trouble on other fiat vans
My fiat Doblo cooling fan stays on when engine is switched off
A significant number of cars have an electric cooling fan supplied by a battery live rather than an ignition live because it is believed the cooling fan should be able to start or to continue running after the engine has been switched off.
Coolant will continue to circulate after switch-off due to thermo-syphon activity and it could reduce mechanical stress on engine components to continue cooling.
Some people modify the cooling system by fitting an additional manual switch to over-ride the thermal switch for use when standing in traffic, for whenever continuous operation is desired or to use in emergency should the thermal switch operation fail.
In the absence of such a modification that has been inadvertently switched on the fault will be due to a faulty thermal switch, a faulty or stuck relay or shorted wiring. Disconnecting the thermal switch should stop the fan and if it does it indicates the switch is faulty. The switch is mostly fitted into the radiator header tank but sometimes is fitted to the bottom tank or the thermostat housing.
Not finding what you are looking for?