Infiniti EX35 - Recent Questions, Troubleshooting & Support - Page 6
I need help locating the fuse for windshield washer on my 2006 G35
Usually, the fuse for the washer pump is incorporated with the wipers, so if your wipers work, fuse is probably good.
Best way to check is with a simple test light. Just unplug the connector for the washer pump, and probe the terminals with a test light clipped to the negative terminal of the battery. Someone will need to hold the washer pump in the ON position, with key in ON, while you are testing for power. If there is power on one of the two wires to the pump, fuse is good, and power is good, so the washer pump is probably bad.
2004 infinity fx35 code c1130 and no start no blown fuses or fuse links any ideas
Possible causes Faulty Engine Control Module (ECM) Faulty ABS actuator and electric unit (control unit) Control Area Network (CAN) communication line Blown ECM fuses What does this mean? Tech notes The code means that the Anti-Lock Brake System (ABS) control unit has detected that there is a problem with the Engine Control Module (ECM). What does this mean? When is the code detected? Based on the signal from Engine Control Module (ECM), the Control Area Network (CAN)-Local Area Network (LAN) converter (CLC) judges that the engine control system is malfunctioning. Possible symptoms ABS Warning Light ON Scanner cannot access Engine Control Module (ECM) C1130 Infiniti Description ABS actuator and electric unit (control unit) and ECM exchange the engine signal with CAN communication line. Major engine components are malfunctioning.
Read more:
https://www.engine-codes.com/c1130_infiniti.html
Im having an issue with
Hi, i used this method to solve a similar problem on a 2000 solara. Here is the fix, remove one of the car battery terminals for a couple of mins (3-4mins). The reattach the battery terminal back. This would make your cd player and car clock reset. once you start your car you should be able to eject the cds. You'll just need to reprogram all your preset radio station.
On the clicking noise when you change gear, check the transmission fluid..
Power seats completely dead to both front seats in G35x Infiniti
If you are getting power to the switch, make sure you are getting power to the motors when the switch is moved. If so, make sure the motors have a good ground. If not, check the fuse box. If you have power to the switch and the switch is sending power to the motor and the motor has a good ground. you have a bad motor. If you have power to the switch, but are not getting power to the motor, you have a bad switch. If you don't have power to the switch, you might have a bad fuse. If you don't have power to the fuse, you might need to check a wiring diagram to see what feed power to that circuit in the fuse box.
How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe
Hi, on most vehicles, the airbag light should come on for at 6 seconds, and then go off if the system is working properly. If there is a fault or a problem in the system, the light will remain illuminated, or flash continuously. If the airbag light does not work properly, some vehicles have an audible tone that sounds indicating a problem with the airbag light system. When the light is on (or the tone is sounding), the airbag will NOT deploy, even in an accident.
<br />
The flashing light on your car is telling there is a problem.
<br />
<br />
<b>How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe </b>
<br />
Ignition Key Method:
<br />
<ul>
<li>Turn IGNITION on (but don't start car).</li>
<li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li>
<li>Wait 4 seconds.</li>
<li>Turn IGNITION on (but don't start car).</li>
<li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li>
<li>Wait 4 seconds.</li>
<li>Turn IGNITION on (but don't start car).</li>
<li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li>
<li>Wait 4 seconds.</li>
<li>Turn IGNITION on (but don't start car).</li>
<li>Wait 3 seconds.</li>
<li>Turn IGNITION off.</li>
<li>Wait 2 seconds.</li>
<li>START Car (the light may be blinking slower than before).</li>
<li>Wait 3 seconds.</li>
<li>Turn IGNITION off.</li>
<li>Wait 3 seconds.</li>
<li>START Car.</li></ul>
<br />
<b>This is a little easier</b>
To reset the light simply turn the iginition to the on position, (you dont need to start it). All the lights should stay on for thier diagnostic check. As soon as the airbag light goes off, before it starts flashing, immeditatly turn the car off. Repeat this 3 or 4 times (turning to on then off) and the light should go away
I would like to find
If the radio is not correctly working or does not start at all, check the following fuse:
• In the passenger compartment fuse box - Fuse number 6 which is a 10 Amp fuse
• In the engine compartment - check fuse box number one. In it, there will be fuse number 37, a 15 Amp fuse, replace it.
To know more about all the fuses in your car and what each does, follow this link: https://knigaproavto.ru/shemy/en/infiniti/g-series/865-2002-2007-infiniti-g35-fuse-box-diagram.html
How to replace the license plate light bulb on a 2006 infinity m35
to change the bulbs on the license plate,all you have to do is open your trunk pop out the plastic caps behind the trunk door and you do it from there its very easy.pop out whatever you need to get to the bulbs i did it. theres no need to go to the dealer for that.hope this helps. Also I purchased my bulbs simply from here:
Aliexpress Homepage
I hope this helped
Not finding what you are looking for?