martin_a_jen posted an answer for this LG RHT498H Digital Video Recorder:
"Try using a lens cleaning disc"
martin_a_jen posted an answer for this Gateway MX6955 Notebook DVD-RW Combo Drive:
"Have you tried using a lens cleaner????"
martin_a_jen posted an answer for this Epson Computers & Internet:
"There are several programs you can use to watch a dvd. You can use windows media player or..."
martin_a_jen posted an answer for this Pioneer DVR-107D DVD±RW Burner:
"Try uninstalling software that uses the drive. You can also try uninstalling programs that..."
martin_a_jen posted an answer for this Computers & Internet:
"If you have the original cd why don't you use your computer to rip the tracks from it as..."
martin_a_jen posted an answer for this Computers & Internet:
"Usually on the front of the cd/dvd player you will find a little hole. After turning off..."
martin_a_jen posted an answer for this Computers & Internet:
"Sometimes if you have a lot of software installed it can cause a conflict. Try to..."
martin_a_jen posted an answer for this Computers & Internet:
"You need to check the soundcard settings. Sometimes there is a feature to switch on or off..."
martin_a_jen posted an answer for this HP 505B B2C02UT Desktop PC - AMD Athlon II X2 220 2.8GHz, 3GB DDR3, 50:
"If there is only a couple of beeps and it boots up ok then there is no problem at all...."
martin_a_jen posted an answer for this Denon D-M39S 192kHz/24-Bit Micro Component System for High Quality Sound:
"Try checking the sound settings on your tv. You may want to change the output to PCI..."
martin_a_jen posted an answer for this Cisco Linksys Ae1200 Wireless-n Usb Adapter:
"Check the clock on your computer. It could be that you computer clock is totally incorrect..."
martin_a_jen posted an answer for this HP Compaq Sound Card:
"You should find it on the next. search for Conexant High Definition SmartAudio 221"
martin_a_jen posted an answer for this Audio Players & Recorders:
"Try using a different usb cable. It could be there's a problem with the cable and if that..."
martin_a_jen posted an answer for this Computers & Internet:
"Go see a doctor"
martin_a_jen posted an answer for this Creative Labs Sound Blaster Live! 5.1 Sound Card:
"Go to Start, control panel, Sound and double left click on Sound. When that opens up it..."
martin_a_jen posted an answer for this HP Omni 120-1125 20" All-in-One Desktop PC:
"You may have a nasty virus. Try booting up in safe mode and doing a full scan with your..."
martin_a_jen posted an answer for this HP Omni 120-1125 20" All-in-One Desktop PC:
"Windows recovered from a fatal error. It probably means you have a little problem with..."
martin_a_jen posted an answer for this Acer Computer AC700-1090 Chromebook:
"My suggestions is download the free Revo Uninstaller and use that to do any..."
martin_a_jen posted an answer for this HP 02277-60003 - Driver Board 02277-60003:
"Go to start, control panel, system. device manager. I don't know what Windows version you..."
martin_a_jen posted an answer for this Computers & Internet:
"Have you checked the windows volume? The computer may be muted."
martin_a_jen posted an answer for this Creative Labs Sound Blaster Live! 5.1 Sound Card:
"Try going to with the Creative sound mixer or the windows sound mixer to check if by any..."
martin_a_jen posted an answer for this Sony Computers & Internet:
"This sounds like a driver issue. You could try checking the maker's website to check if..."
martin_a_jen posted an answer for this Cakewalk SONAR 4 Producer Edition for PC:
"If you are recording from bar 1 at time 1.00 you might want to start recording one or two..."
martin_a_jen posted an answer for this Cakewalk SONAR 4 Producer Edition for PC:
"May I suggest you try to adjust your audio settings inside Sonar. Also it is a good idea..."
martin_a_jen posted an answer for this Computers & Internet:
"Try increasing the memory as 512 is small. Also defrag you hard drives often and make sure..."
martin_a_jen posted an answer for this Computers & Internet:
"Go to control panel- printers and check that your printer is selected as the default..."