Question about WM6 Captive Air Well Tank
...WellMate Tank WM6. I prime the pump, turn on the power and the most psi I get is 15 or 17 psi. No leaks. Cut Replaced an old submersible with the new jet pump thinkng that was the problem. Still no ...
Question about WellMate Tank Fittings Package TFP2-1.25-RV - 30/50 psi Pressure Switch TFP2-1.25-RV-3050
...pressure valve. Close the supply valve to the tank. Open the priming port of the pump, (plug on the upper most part of the casing) pour in water until the pump is filled -up. Close the plug just ...
Question about WM6 Captive Air Well Tank
pump will not come on .if i shake tank it will kick on.there is water in tank when i shake it Needs new pressure switch and riser nipple
...pressure switch is set at 40-60 psi Pentair/Wellmate deny they have a problem with their product. The statement a very short time is subjective however think you are correct. I think you can get help ...
Question about WM-6 Well Pressure Tank 20 gal
...WellMate WM6 pressure tank be bad? If the washer is on, I have nothing in the rest of the house, but the pressure always comes back- but for limited use only the down pipe in well is blocked , it has ...
Question about WM-6 Well Pressure Tank 20 gal
...wellmate" 40 gal, brand new. I replaced the checkvalve. Pressure range at the tank is 40-60psi and I am not loosing pressure while the faucets are shut off. I have a water softener and air comes into ...
Question about Fiberglass 20 Gallon Bladder Pressure Tank - WM-6
intact you'd be unable to get water through the air valve. Is the tank new or old? If it's a new well/pump/tank there could be something wrong with the pressure switch or it could be out of adjustment
Question about Fiberglass 20 Gallon Bladder Pressure Tank - WM-6
where can i buy Wellmate WM9 pressure tank in mich Search on line. Why do you need to buy in Mich? Just order on line and it will ship to you.
Usually answered in minutes!
136 Questions
113 Questions
61 Questions