Questions & Answers for: toro lawn mower vapor lock

Question about Lawn Mower With Toro Power Tools

1 Answer

Toro lawn mower sputters and stops working after running I have a Toro lawn mower that sputters and acts like it is out of gas after it runs for a while. I let it sit for 5 minutes and it starts right

Ad

Question about Lawn Mower With Toro Power Tools

2 Answers

toro mower-shut off, won't re-start i have a toro-recycler. it is about four years old and has always run great-until now..it shut off in the middle of the yard and wont re-start. i put in fresh ...

Ad

Question about Lawn Mower With Toro Power Tools

1 Answer

...vapor lock is what your mower is doing. The gas is boiling in the fuel line before it gets to the carburetor. after it sits and cools off the carb gets the gas to start. two things to do is set the ...

Question about Lawn Mower With Toro Power Tools

1 Answer

Toro mower will not start I have a Toro mower with a 6.5 HP Tecumseh Engine my problem is the mower will not start when the engine is warm, could this be a vapor lock problem or carb issue? coil is ...

Question about Lawn Mower With Toro Power Tools

1 Answer

...lawn mower rear bag starts right up and then mows about 6 rows before stopping. I start it again and it mows about a row and stalls. I let it sit for about an hour or a day and it mows about 6 rows ...

Question about Lawn Mower With Toro Power Tools

1 Answer

TORO 6.5hp-Tecumseh engine won't start. When I pull the cord the valves start to move but on the second pull it seems to sieze up and blow some vapor out the exhaust.It ran fine last week...any ideas?

Question about 42'' Zero Turn Lawn Mower 22hp Kawa Consumer

2 Answers

19 h.p. kawa mowing and motor stopped. Will not turn over at all. PTO was engage when shut down your spark plug wires may have come off see if it vapor locked pull plugs out and turn it over without ...

Question about 42'' Zero Turn Lawn Mower 22hp Kawa Consumer

1 Answer

vapor lock on a toro lawmower? lawmower turns when plug is not in when you put plug in it locks up. Try spaying WD40 in cylinder, pull rope several times to blow out cylinder. Ensure oil breather hose

Question about TimeCutter Zero Turn Lawn Mower Hourmeter Kit 1129763

1 Answer

what causes the mower not to start and solenoid hammers very loud ? When attempting to start the mower, the solenoid makes a clicking noise. The battery is up and new. check for vapor lock

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...