Questions & Answers for: taking slack throttle cable push

...throttle Safety switch sticking. Is the cable slack when you let go of the bar? Does it start even if the handle isn't squeezed? If it is and does then cable is frozen or the kill switch is stuck in ...

slack in the throttle on my 2005 softail duece (fuel injected) Ok, I'm not very familiar with fuel injected models because I don't work on them but they should have a throttle cable like anything else

...slack in the throttle cable? If there is excess slack in the throttle cable, you can do 1 of 2 things.  Either replace the cable, as over time it gets stretched out.  Or you can look by the ...

...slack on the throttle cable My first question is why is there slack in the cable?  If it's just the outer housing is drooping away from the handle where it runs down to the engine, you can ...

...Throttle cable pulls back but won't push forward and springs underneath housing seem extremely loose. What do I need to repair/replace? My Victa push lawn mower won't shut off. Throttle ...

Throttle cable assembly Need help assembling my throttle cable to my Briggs and Stratton 675 series 190cc push lawn mower. The cable you are trying to replace is the OPC cable (engine brake cable), ...

...throttle cable is broke from handle an its fires up but idels very high until I pull the cable then it runs almost how I did this? Take model no. of mower to mower repair shop to get new throttle ...

...cable slack, push cable housing 1/2" forward, tighten cable retainer nut. I started the mower, pulled drive handle but the mower didn't move. What else is there to check or adjust? I tipped the mower ...

...but they won't pull the mower at all. I tried replacing the belt, but that didn't help. Husqvarna hu700f belt wrong size make sure the tension pulley is there to take up slack cable needs ...