Question about Blowers Rake and Vac - Electric Blower/Vac - 51573
...snow blower keeps coming off The auger belt will not stay on the drive. After returning from the repair shop I was able to throw about 30 feet of snow and the belt came off and was destroyed. I ...
Question about Snow Blower. Sno-Thro Deluxe Drift Cutters for Snow Throwers
...Auger does not turn snow is pushed rather than blown first check shear pins in the auger ( try to turn big auger by hand, engine off) then if they are good then try to turn impeller by hand, engine ...
Question about Power Max 724 OE 24 inch 205cc Two Stage Snow Blower
toro power max 724 - auger lever wont stay engaged when the drive lever is engaged adjust the cable for the auger , easy
Question about Power Max 724 OE 24 inch 205cc Two Stage Snow Blower
...up when you have the "drive" handle down ?? Newer snow blowers are often equipped with a "one hand" feature that will keep booth the auger and drive handles engaged (down) with only one being
Question about Power Max 724 OE 24 inch 205cc Two Stage Snow Blower
...snow, auger wouldn't engage, blades spin on axle sound like you might have 2 problems. If auger doesn't engage in heavy snow you probably just have ice accumulation inside the impeller. Dont try to ...
...auger is engaged it will not turn and it starts smelling of burning rubber blocked or frozen blower inside of housing, move to warm area or chip out the ice youre going to need a new belt after ...
snow thrower auger won't turn The auger wil not turn (however the impellar does turn). I replaced the belt and all the shear pins, but the augers still do not turn. One of the grip levers should ...
Question about Power Max 724 OE 24 inch 205cc Two Stage Snow Blower
...auger does not engage/spins freely right auger works fine but the left auger does not engage and can spin freely when machine is off. The shear pin is sheared off. Somewhere along the auger, you'll ...
impellar will not turn auger does not turn when lever engaged pull the belt cover off and check the belt if it is ok the key in the beltvpulleyb that drives the auger could be sheared
...is a pulley that moves against belt to engage front auger.There is a spring that hold it in the off position and when you pull the handle it moves that pulley.Sounds like spring broke or slipped
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions