remote control I wish to control the screen through the rs232 port. This is stated as a service port only (3 wire mini jck) is there a way of using this port instead of the IR handset The only way I ...
broken coaxial the cable coaxial on my tv is loose an spins when i connect the cable its very fuzzy an can barely see channels is the an easy fix an if so what can be done yes it is,but the thing is ...
Question about LN-R328W 32 in. HD-Ready LCD Television
Have lines going accross screen that look like blinking colored d Have lines going accross tv. They are colored blinking lights Bad or loose wire. does this happen only with tv or with dvd and video ...
I have a red overlay over the picture Are you using the component input(3 wire video of green,blue and red wires). be sure wires are connected correctly on source and tv. if not color will be wrong.
my digital home theater reciever say the following.hello,, d in protect. It is detecting short circuits either in the receiver power amplifires shorted out or the speakers wire are shorted out, try ...
Very dark picture on LN-T5265F. Can hardly tell the set is on without shinning a light on front. If I was not careful when looking at the set I would state there is no picture at all, but that would ...
i have a samsung 32 lcd tv from 23 month and is out of warranty, it is decreasing volume to 0 by it self can you please tell me what is the problem. i already did take off batteries from remote. Hello
Samsung LCD TV 46 inch LN46A550 colors are all messed up. The picture is mostly pink with all other colors are off and look neon bright. My solution to that pixelation color problem was replacement of
Question about LN-S4041D 40 in. LCD HDTV
after replacing the caps on my Samsung LNS4041DX/XAA the clicking on/off problem was resolved, but now I have another problem while replacing my pin connector one of the wires came out of it's pla
Question about LN46A650 46 in. LCD HDTV
Replaced main power board and t con board. Picture now works, but horizontal white lines moving upward. Sounds like fault with its main power supply bard too. Check all the wiring connections from the
Usually answered in minutes!
357 Questions
285 Questions
270 Questions
256 Questions
175 Questions