Questions & Answers for: reset timer ge old washer

...Bottom of washer appears clear and unobstructed. Any ideas?? Reset the washer manually. Close the machine, and slowly advance the timer till you here the fill valve start. Then let it do it's ...

...reset this machine? I have unplugged the power cord for twenty minutes, replugged it and it still will not power up. I THINK YOUR TIMER MIGHT BE GONE ON YOUR WASHER. CALL A REPAIRMAN AND EXPLAIN YOUR ...

...does drain though.It goes right through the cycle. hi, reset the printer. open th right door,without paper then close the door it work thank you hello mam please check the timer switch and the

...Timer switch R23 to R22 closed in spin--Ok No lights, Blinking or otherwise on motor inverter board. Machine is about 6 months old. Used heavily at an dog vet. History or suggestions???????????? This ...

...reset" button? I am not a repair professional. I am just a 78 year old man who has been making his own repairs for about 50 years. Therefore the washer or dryer ID doesn't mean much to me. I came to ...

...reset the breaker and it tripped again. After a while the washer was working again but when spinning the tub it sounded like it was starting and stopping quickly. I unplugged it and am probably going ...

...Reset the Inverter Board: Push the timer knob in so the washer is idle. Unplug the machine for one minute. Plug back in and raise and lower the lid six times within 12 seconds. After resetting the ...

...ge washer WJSR4160G1WW is only 4 years old and only 2 people live here and I do not wash but once a week usually, and it drains water ok but the clothes are wet does not seem to be spinning and I ...

...timer displayed 23 minutes left in the cycle. I've tried unplugging the machine to "reset" the electronics. Is this an issue with this machine? Is it worth fixing? The machine is 3 years old. Thanks. ...

...reset & it does this all thru wash cycle If this is only on normal wash and not happening on the other cycles then you have a problem with your timer program for the wash cycle. try spinning the dial ...