Questions & Answers for: Toyota how do i remove the mold

...mold under carpet needed to replace! Made a fuss at dealers for reacurring problem and they replaced the carpet for free. Your A/C drain hose may be plugged. If so, the condensate from the A/C box ...

need to remove fender trim to get to wheel well to expose power antenna can't remove outer fender trim ? There are several screws inside the fender well that have to be removed and one in the pinch ...

how do I change the license plate light? License Plate LampRemoval & InstallationTo Remove: Remove the luggage compartment lock cylinder. Remove the luggage compartment door garnish molding. ...

...same thing happened to us. We have a 2000. The fix is easy, sort of. From the inside of the van, remove the bolts holding the handle and the pull ******** the hatch (inside). Then, starting from ...

...and feel for the clips that hold it in. If its completely surrounded by a molding you'll have to remove it by applying gentle pressure at the corners of the molding to pop the clips. That type is ...

...front molding. Almost all front and most rear lamps, are in lamp housing assy's, that have to be removed to access the lamps/bulbs You will have to look from inside the engine compartment to find ...

2000 Toyota RAV4 side door emblems How do I remove, then replace [higher] RAV4 emblem on side doors to allow fitting of body protection mouldings. I am sick of being 'dinged' by others

water in boot IF YOU HAVE CARPET IN BOOT REMOVE IT AND LOOK FOR HOLES AND ALSO KEEP AN EYE ON THE RUBBER MOLDING AROUND THE BOOT

drop some money inside the e-brake area needed info on how to take apart Remove the center console compartment you should see several screws, remove them, follow the console molding and see if there ...

...mold & panel is ready to come off once i can remove molding around handle. Hi Craig, There's a screw which must be removed from the back of the molding. Once that's removed the unit is pushed forward ...