Questions & Answers for: remove cover plate intermatic wall

...I want to paint the wall behind it. That knob should just pull straight off. Check to make sure there isn't a tiny set screw on the side, but otherwise you can pull it off and remove the cover

...it from my wall how do i remove my intermatic timer / light switch from my bathroom wall? simple remove the plate then there are two screws that you need to unscrew then you pull the whole thing

Describe how I would remove my Intermatic fan switch from the wall. Take cover screws out. Remove screws from switch to box. Remove switch. (power off)

...Remove the battery cover and one (1) battery. 3: Decide on a four (4) digit code. You must enter your desired code within 5 seconds of reinstalling the battery. 4: Reinstall battery and immedately ...

How do I remove the knob so I can remove the back plate without breaking anything? Most of these wil just pull off, but some has a small set screw on the knob.

...intermatic switch won't turn off the outdoor lights. It covers the original light switch. It has a plastic cover with a extention that press smaller button underneath that says no op see inst. Please ...

...TIMER SWITCH SO YOU CAN REMOVE THE SWITCH PLATE. The knob pulls off. Use a screwdriver or fingernail file to pry up. Some really old timers, the knob attaches with a tiny screw located on the

Intermatic-timers-and-manuals.html#KM 3) Do you want 7-day single pole and 3-way timer that uses decora plate and can fit into any gang box with decora plate? http://waterheatertimer.org/GE-timers-and

cover plate. Some really old timers have a set screw on the knob itself. Most 'knob' timers fit onto a shaft by friction. Put a pry bar under it and force it off. If timer is attached to cover

...remove the plate, please be advice. 10-22-12FF30 Intermatic timer: The turning knob pulls off.(With some really old models, 1960s, there is a small set screw on the fat end of knob.)Under the knob is ...