Questions & Answers for: red nut driver plugs located

Question about 24 in. SL34A006UC Built-in Dishwasher

1 Answer

nut driver or socket into the circulation pump opening ont eh right hand side. The nut driver will engage a nut on the center of the circulation pump impeller rotate it 2 revolutions clockwise to free

Ad

Question about LL65 Built-in Dishwasher

1 Answer

...red nut driver plugs are located on the front of the dishwasher under the toe kick. The reason for this is that you need to slide the dishwasher in place before you raise the legs, otherwise you will ...

Ad

Question about 24 in. HDA3400G Built-in Dishwasher

1 Answer

...nut driver/socket, phillips screw driver & pliers. I would remove the drain hose from the sink and put the end into a bucket. Start the d/w into spin and see if water releases. If it does, clesn ...

Question about 24 in. HDA3400G Built-in Dishwasher

1 Answer

...nut driver or philips head screwdriver and remove the screws from the lower front of the dishwasher. Then lay on your side and with a flashlight. Turn the dishwasher on as if you were going to wash a ...

Question about 24 in. HDA3400G Built-in Dishwasher

1 Answer

...located under the dishwasher(use a flashlight for the best look) What you are looking for is a "pig Tail" which is a small section of what looks like an extension cord which should run into a small ...

Question about 1998 Passport

1 Answer

...located on the drivers side right below your manifold and right above the start of yur exhaust. Good luck trying to replace. I have no idea how to do this other than to drop the exhaust... How To ...

...driver fender, and the fuse box. This wire is red , and taped up. Grab hold od this wire, and pull it out of the tape. It has an eyelet on the end of it. The next wire is below the steering column, ...

Question about 24 in. MDB5651A Built-in Dishwasher

1 Answer

...at the bottom of your d/w on the right hand side in a small box. You may need 1/4in nut driver to open the box and there you will find your white(neutral) and black(hot power) wires located

Question about 24 in. MDB5651A Built-in Dishwasher

1 Answer

...nut driver or phillips screw.driver. Remove panel. To the right side you will notice a silver square plate that has wires running into it. Remove the 1 screw usually on left with 1/4 inch nut driver. ...

Question about 24 in. MDB5651A Built-in Dishwasher

1 Answer

...red button on it. Please help. The model number will be something like 665. 15xxxxx branded on a plate located in the left side of the dishwasher door inside.Please check this site to see if the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dishwashers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...