Questions & Answers for: push button ignitor

Question about Heating & Cooling

1 Answer

...ignitor button When hooking up a new 20 lb propane tank to the heater, it must take 4-5 minutes and almost endless pushing of the ignitor before the pilot light will ignite and stay on. I was told by ...

Ad

PUSH BUTTON IGNITOR DOES NOT LIGHT THE BURNERS PUSH BUTTON IGNITER DOES NOT LIGHT THE BURNERS IN THE BBQ PRO SERIES 6430 BRINKMANN Clean any grease or residue that might be on the ignitor preventing ...

Ad

...the wires to the push button ignitor? the push ignitor should have a spade attachment on it for the side burner wire and the main wire end should be round and will push into the end of the

Question about 632 sq. in. 16324

1 Answer

button that you just push in to reset. If the induced draft motor comes on as soon as thermostat calls for heat then the next thing to check is the ignitor. It may be a hot surface or spark ignitor.It

Question about CharBroil 4637318 Grill

1 Answer

...wire? where do I do this...I know it's @ B but where? The single ignitor wire should attach at the back of the "push button" starter. It will be on the front panel and probably says "push to

Question about Genesis Silver B Grill

1 Answer

...ignitor button. I installed the ignitor with the box opening on the bottom and checked with a mirror and there is spark when the ignitor button is pushed. The burner lights with a match and the gas ...

...push button to the ignitor head. The wire just slides on to a long need like prong on the bottom of the peizo. Gently, but firmly pull this wire off by it's sleeve and push it back on again. That ...

push button ignitor. Remove the outer plastic ring around the rubber push button. It unscrews counterclockwise. The battery will be inside the holder. Replace the old battery with a new, like kind (AA

...push button ignitor I'm looking for a pietzo type push button ignitor for a vent free heater, would a ignitor from a gas grill work? It will work if it can be mounted correctly in the heater and ...

...push button on back side. Power off unit, unplug or turn off breaker so no power to heater and verify no power. If you see thos switch push reset, if you feel it click then power back on and then try ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...