...problem is there any setting in printer setup ..can u plz help me & I need online support also... Thanku Regards S.Althaf It-Engg Newcity Modren Shopping Centre Erbil,Iraq. Ribbon breaking ...
...printer to make the ID cards, but all attempts to print an ID card have failed. Every card I have tried to make has been unsatisfactory, with colours not printing, very poor image quality, and the ...
Question about DTC525 ID Card Printer
...printer problem. Any solution to this problems? you can check with fargo, or perhaps your vendor is giving you the bad rep, since they refuse to help you. i would not do business with them again. if ...
...tri color has occur problem . its 6983 printer i change the catridge of tri color but still orange light is blinking on tri color catridge.please advise me what would be the problem. card hopper ...
...problem I am getting on left side of card white line about 1mm ... So printed is not to the edge. What to do ? The Fargo DTC550 will not be able to print an "over the edge" card. Any Direct To Card ...
Question about DTC550 Thermal Card Printer
...printer shows head lift error ...so ..how can I solve this problem ? I had the same problem with my fargo dtc 550. I changed the "O" Ring rubber attached to the printhead and that solved the problem. ...
Question about DTC515 Thermal Printer
...problem my printer.one day I to install driver pargo, and I think the driver is broke. But the printer so can't print. pleace help me what I do? i think your driver is wrong or your sofware i hope i ...
...Common problem with the DTC300, C30, DTC400. Upgrade the firmware and printer driver from Fargosupport.com. Then calibrate the ribbon sensor through the printer driver calibrate tab. ...
...to ensure that my printers feed. Do you have any idea of how to solve this problem, or what I may be doing inccorectly? I have this exact same problem with same printer. Have you found a
...printer out problem Not sure exactly what your problem is; need more information on what were you doing when you received the message, etc.. Support information for your printer including updated ...
Usually answered in minutes!
86 Questions
40 Questions
11 Questions
18 Questions
17 Questions
