Questions & Answers for: poulan pro 42cc chainsaw weak

...Poulan PP4218AUX , 42cc with a 18" bar. It will not start. I am getting a spark & I also installed a new plug. I thought it was in the fuel supply but when I manually put a small amount of fuel in ...

...Poulan pro 4218 that has only a few hours on it. Ran fine yesterday. Today will not start. Checked the spark plug... No spark. Replaced the spark plug... still no spark. New Saw? Warranty time ...

Pro 42CC 2 Cycle Chainsaw, 18": how does this module work, what is the circutry ?"... How does this module work what is the circutry ?" If you are speaking of the ignition module, the flywheel magnets

it is getting fire and i took spark plug and put a little gas in head and it still would not fire up nor even sputter Change the electrical power coil = all in one spark plug cable and coil

I have a 18 in poulan pro that want run. has new plug, air filter,gas filter Check if is any "spark" at the spark plug.If not change the "coil" =spark plug cable and coil all are together.

lost spark in my poulan 306a chainsaw suddenly. Was using saw stop to refuel after refueling saw would not start no fire have you tried a new spark plugg i would start there

where is the spark plug on a poulan pro 42cc remove the top cover i think 4 screws the plug is under there 

what is the spark gap for 221 pro 40cc what is the gap setting for a poulan 221pro 40cc dura chrome chainsaw 14 inch blaide The gap for all Poulan chainsaws, regardless of the spark plug used, is .025

what size spark plug for poulan 42cc chain saw? It depends on the model number for your saw. Please re-post with you model number so that I, or others, May further help you.

fire! If not! change spark plug! 2) Fill fuel tank, Pull spark plug ou, turn upside down chainsaw, if fuel drip from the cynlinder than you need to change carb gasket. 3) check if the bubble primer is