Questions & Answers for: poulan farmhand

Poulan Farmhand chainsaw chain tightens too tight for motor to move chain The chain on this Poulan tightens to the point that the chain will no longer spin on the bar after chain adjustments Make sure

Poulan #2550 farmhand saw, Put a new carburetor on saw still not getting gas to carb? Try emptying the fuel tank, and with small flashlight inspect the fuel line and the sump pick-up screen inside the

...Poulan 2775, 2.8 C.I., Farmhand Family: YPWES 0464CS EM Disp: 46 C.C. S/N: 00055D300207-1 If it keeps coming loose, you could try some thread-locking solution on the screw to keep it in place. The ...

...the ignition switch connection at the coil or module to see if is a bad switch (should fire the plug with that wire loose). i have a poulan 2900 farmhand it wont start unless you put gas in ...

...100 to 1 just put 8oz in 5 gals and it works with everything. I believe Amsoil has a simular mixture available as well. My Mac does run @ 32 to 1 mixture though as does my Poulan Farmhand and 35 ...

poulan chainsaw 2.5 ci farmhand boggs out when choke is turned off? Check for plugged fuel filter, hard/cracked/rotten fuel lines, plugged muffler and air cleaner, or loose fasteners on the carburetor

...Poulan 2750 Farmhand. Will start, but not stay running. Spark plug tip color is perfect. Found that ther fuel line pickup in the gas tank cracked, fell off and needs replaced. Can the right ...