Questions & Answers for: poulan 2000

...poulan 2000 woodsman the poulan chainsaw wont oil it is a 2000 woodsman no oil going to bar and chain did you check the oil hole on the bar to see if it clogged? It's probably the oiler check valve ...

I need a manual and parts list for a Poulan 2000 Chain Saw. It's a 14", 33 cc. I contacted Poulan and they e-mailed the manual.

2000. I have 3 older Poulan chain saws, XXV, 1800, and 2000, essentially identical saws. They all use a check valve from the crankcase to pressurize the chain oil reservoir. The check valve apparently

what is the proper setting for the hi low idle screw for a poulan 2000? the setting is aprox 1 1/2 turns on low idle and aprox 1 1/2 to 2 turns on high

...Poulan chain saw 2000. I can not Hi...I have a Poulan chain saw 2000. I can not get the fuel line to prime up to the carberator. The hose is fine? It will start with a spray of ether, but stalls ...

i have a poulan 2000, can you tell what type of fuel i need to use. 2 stroke 30@1 mix

...Poulan 2000 16" chain saw but it I can start my Poulan 2000 16" chain saw but it will not stay started. It stops, I can re-start it but the same cycle continues. I cannot find my users manual so ...

Do you have a free manual for a Poulan 2000 chain saw. Thank you Here is a Digital copy you can print for free - http://www.msgulfcoast.org/eom/Poulan/Poulan.pdf Hope this helps Aaron

FUEL LINE ROUTING FOR POULAN 2000 CHAINSAW Hi rstinn...I hope this helpsPlease rate meBud

how to tune the carb on 1950le poulan chain saw Adjustment screws were closed in fully H I ONE quarter turn L one turn then adjust the idle.