Questions & Answers for: Juki off hook

Question about MO-644D Mechanical Sewing Machine

1 Answer

off machine! (1) break screws on the hook loose. (2) tighten one back up very skightly, one you can reach when the needle bar is at its lowest position. (3) lower needle bar to its lowest position. (4

Ad

Question about DDL-8700

1 Answer

...off machine to set the hook....yes they can jump timing and this is an unfortunate condition as balance is critical in the hook area... at 5500spm the company could not install a permanent fix ...yes ...

Ad

do? thannks tilt machine back all the way and use a short screwdriver to tighten one screw slightly. this will hold hook in position while u tighten other screws. its easier if u take off feeder plate

...hook mechanism. It's jammed, can't figure out how to get everything off to remove the thread. Everything else moves fine when the positioning finger is off, so that leaves the thread to be the issue? ...

Question about DDL-8700 High-speed Single Needle Straight-stitch w/ Table & Motor

2 Answers

as it comes around. If you use too large a needle (larger than an 18) it will sometimes break the needle because the hook is actually coming around and hitting the needle too close and breaking it off

Question about DDL-8700 Industrial Straight Stitch Sewing Machine, Servo Motor

1 Answer

...hook assembly had burs i filed them off, but it keeps fraying the thread. Hello Daniel, I suggest you start with a new needle. Back off the needle thread tension and the bobbin thread tension to a ...

Question about DDL-8700 Industrial Straight Stitch Sewing Machine, Servo Motor

1 Answer

...off the hook. slide plate that covers the hook and turn wheel slowly and watch the needle and hook interplay. unthread needle for this. the hook should be about 1/16 from needle before the needle ...

...off feeder plate, loosen the 3 screws that hold the hook then lower the needle with the wheel until the needle just starts to rise. bring the loose hook point to i/16 " fron the needle and tighten ...

hook to grab it. Take your needle plate off and examine it closely with a magnifying glass. If there are grooves, purchase some emery cord and run it back and forth until the edges are smooth or buy a

...off is stuck inside the machinery, but when I tilt the head back I can't see it in the bobbin area. Someone please help me. The broken needle may be jammed in the hook or race and/or the hook or race ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Juki Sewing Machine Experts

Cindy Wells

Level 3 Expert

6688 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66977 Answers

Are you a Juki Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...