Questions & Answers for: Bernina e machine smoke

...smoke from inside an artista 180Screen switch on and off. After smell we switch off quickly. Is it motor pcb or power supply. Machine is few years old we are first owner but it did not work more than ...

...smoke came out of back right side when sit ting in front of machine. The problem was C-10, a .1 micro fard ( uf) capacitor rated at 250 or 275 volts ac. It is a suppression capacitor and exploding is ...

...smoke came out of the top left hand side of the machine. What happened? I thought it may just be the light bulb, so I replaced it. The machine still will not work. This machine is about 12 years old ...

this is on the back of the machine, but its possible that smoke has found its way to the openings around the takeup arm and foot lifter. Best thing is to have it checked-out by a Bernina service agent

...smoke came out the back of the machine, so i quickly unplugged it. As it had recently been serviced i thought it can't be too serious and now when i do some sewing i unplug as soon as i am finished. ...

My bernina 1031 went up on smoke last night, it made this loud noise and then all this smoke started to appear from the inside. Bernina 1031 it was service and the stitch lever fix a year and a half ...

My peddle for my Bernina 930 electronic started to smoke and now machine does not work. How can i repair this? replace the pedal

...smoke after routine maintenance sevicing. My Bernina 930 sewing machine was fine going in for servicing, When I got it back and the first time I started to sew it started smoking sparks flying and ...

I have a Bernina 830 sewing machine. I had a jam yesterday and a little smoke came out the back. Now, the needle arm will not move. Motor works though Time for a qualified tech. It’s not easy for r ...

...Smoke usually means the electrics and/or the motor are starting to 'Burn Out'. This is possibly a serious issue. You will need to take it to a specialist repairer as they'll need to open the sewing ...