...loc" display When I try to turn my oven on (with start button), "loc" shows up on the display panel. How do I undo this? This just happened to me. I have whirlpool double oven accubake. The display ...
LOC Blinking The machine is saying LOC and wont run Control Lock To avoid having someone accidentally start or stop the washer, press Options and Select at the same time and hold for 10 seconds until
Question about Accubake SF362LXTS Kitchen Range
...display shows "Loc" and the oven will not work. It earlier displayed E1 F5 and the door would not unlock. I unplugged the stove and plugged it back in, and the door openned. Now it displays "Loc" and ...
display says loc Door is not locked, but display says LoC and oven functions do not work The LOC is for the buttons, it's a safety feature. One of the buttons should say "lock" or something next to it
ERR LOC on display when I try to start the washer I get the (minutes of wash cycle ) then LOC when I press cancel I get ERR LOC displayed ? Your door lock switch needs replacing.
Question about Trail Sentry 11-9200 Digital Camera
...display shows Loc and the SD Card flashes. The instruction manual does not reference this setup code. Does anyone know what 'Loc' means? I tried to reformat card, I also so not get a Y/N option for ...
Question about Elite 44173 30 in. Electric Cooktop
the oven again by pressing and holding the "Stop" or "Oven Lock" button until "LOC" appears in the display I pressed the stop button until it cleared and the LOC display dissapeared. Thank you so much
...Loc" from display. If the above does not work have you tried removing power from the uit for a few minutes to see if it will reset. ________________ ...
Question about Affinity 5.8 Cu. Ft. Gas Dryer
cant open the front door seems like its locked My frigidaire affinity dryer displays LOC - Fixya www.fixya.com/support/t4561247-frigidaire_affinity_dryer_displays_loc my frigidaire affinity dryer ...
Question about Affinity 5.8 Cu. Ft. Gas Dryer
Display "LOC REF" briefly Display all segments again for 30 seconds Display "LOC REF" Acknowledge the "LOC REF" by pressing the "Hour Down" and "Minute Up." Test control pads. Oven should now function
Usually answered in minutes!
924 Questions
608 Questions
343 Questions
293 Questions