Questions & Answers for: Whirlpool lint cleaner

...bottle brush or with an attachment from a vacuum cleaner to get inside. If all looks good and still no lint on the screen, the screen may be too short for the dryer and could be a wrong screen for

lint screen areas using a vacuum cleaner, and round head brush with appropriate cord to for reach. Lint exhaust duct pipe was indeed filled with lint and was long overdue for a cleaning. Performed the

lint is with a tweezers but it laborious and not very effective. How do I deal with this? Lintjammed. Hello Lintjammed ( I like the name).. You may be able to add a skinny tube to your vaccuum cleaner

...cleaner but nothing has helped. is the machine noisy on spin cycle Clean the washing machine lint trap if your washer has one if not buy a washing machine lint trap at a place like home depot. If ...

...lint out of the machine and to use electronic contact cleaner on the buttons and computer board. BEWARE that this cleaner can remove the print from the keys so read the articles carefully. Hope this ...

...cleaner down the pipe but water still comes out sometimes. is there a lint filter? its your drain pipe thats blocked up,, i take it its the one that the washer is pushed into and go's out the wall to ...

have had machine for 3 yrs - had no problems until recently when there now is a li\ot of lint on the clothes. i have changed detergents but this has not helped If you have a lint problem, here are a ...

...lint might) on dark clothes. Do you know of a way to overcome this problem short of getting another brand of washer? Thank you for any help you might be able to give us. Linda sounds like you might ...

...lint screens after each and every load but this has built up in the bottom in the stainles I have used the extension hose on my vacuum cleaner and my hand-held cleaner and have tried to run a brush ...

...vaccum cleaner w/ a long hose or lint lizzard (extention for the hard to reach places) large trashbag, about 3 to 4 hrs, and plenty of patients. Make sure you don't accidently disconnect any