Questions & Answers for: light gas log pilot lights

...gas logs, model # VSGF28PTC and after i light the pilot light and let go of the control knob the pilot light goes out. Hold pilot button longer. if this doesn't work your Thermopile has gone bad and ...

...gas logs. The pilot light I have a set of propane gas logs. The pilot light will not stay lit. It seems that the safety switch is not allowing the gas to flow through. Check the connection of the ...

...gas arrives, the lighter will light it. After the pilot lights, you will have to keep the button pressed long enough for the thermocouple to get hot enough to set the pilot to stay on. When it is hot ...

...light area to tha gas valve. It feels the heat from the pilot and keeps the gas valve open for gas to flow to the pilot or to the logs when in the lit position. Without the gas valve will stay

...gas Pilot light stays lit various times, sometimes for several days then other times for a few minutes. Lights best when temp outside is below freezing. Pilot flame appears to receive too much air. ...

...light on my gas logs and when i switch it to on the pilot lowers for a second, then clicks and dies out. Can someone please help!!!!! Thanks the pilot flame must heat a thermal couple that develops a ...

gas fireplace won't light It is a direct ignition fireplace without a pilot light. It won't light Your fireplace does have a pilot. It is either millivolt, where you manually light the pilot and use a

...light stays lit but burner on gas logs goes out You may need a new pilot assembly. Typically one of two issues result from a bad pilot assembly: 1. The pilot won't stay on after lighting it 2. Pilot ...

...light but there is gas running to it I am not a service professional, but just a homeowner who has some experience with this gas log. GAS LOG INSTRUCTIONS Brand: Marco Gas Log (company is now out of ...

...gas logs do not light pilot This is a replacement from a previous ng log set. There is gas in the line. I switched to ng per instructions (pretty sure I did it right). Igniter gets good spark. Valve ...