Kenmore warm and ready draw self cleaning oven the safety lock is out without the door being shut, the lock light is still on, and we are getting an F4 error when we play with the buttons, the oven is
...kenmore wall oven/microwave model # 911.47813201 after an hour of self cleaning an error code F4 first appears than an F9. What does this mean? And what part would I need? F4 is a shorted oven ...
...F4 is an open circuit in the oven temperature sensor. F2 indicated the oven temperature exceeded the clean runaway temperature (Self Clean mode only) or the cooking runaway temperature (cooking mode ...
Question about 30 in. Electric Gallery Series Self-Cleaning Double Wall Oven
...heat Defective Sensor or EOC F3 Oven Sensor Open Replace Sensor F4 Shorted wire or Sensor locate short and correct it F5 EOC failure Replace EOC F6 EOC failure Replace EOC F7 EOC failure Replace ...
...Kenmore single gas oven. In the last week I'm intermittently getting an F4 error when I try to pre-heat. I dislike new electronically contolled ovens so much. Electronics are never meant to be near ...
Question about KDRP487MSS Dual Fuel (Electric and Gas) Kitchen Range
...Afterwards it said F 04 on the display. The doors open again, but neither of the ovens work The F4 error indicates a Shorted Oven Temperature Sensor (RTD) - Replace oven temperature sensor
Question about 40494 / 40495 / 40499 Electric Single Oven
...oven was in self cleaning mode Locked door - Kenmore 790.4671 - was in self-cleaning mode. The oven started beeping, a F10 error code is flashing, and the door is locked. How do you get the door ...
Question about 30" Self Cleaning Electric Range Stove W/ Oven Freestanding Black & Gray
...F4 error means that the oven temperature sensor is giving an open signal. Probably the oven temperature sensor needs to be replaced. However, sometimes, the wiring harness between the sensor and the ...
Question about 27 in. Electric Double Self-Cleaning Wall Oven
f4 code is displayed and oven beeps continuously Hello Duane, I am happy to assist you. Typically, error code F4 indicates a lockout error. Try resetting the unit by unplugging it or flipping the ...
Question about 27 in. Electric Double Self-Cleaning Wall Oven
kemc377. Why is it showing error code? F1 DOOR SWITCH F2 KEYPAD F3 TEMPERATURE SENSOR F4 MEAT PROBE SHORTED F8 SELF CLEAN LATCH PROBLEM All other errors, replace the main oven control
Usually answered in minutes!
924 Questions
608 Questions
343 Questions
293 Questions
