Questions & Answers for: kenmore elite dishwasher completing cycle

Kenmore Elite 665 16912001 Dishes not completely dry. My Kenmore dishwasher is about six years old. A couple of weeks ago I thought I smelt burning plastic while it was running. The dishes are now not

...kenmore elite model 665, It does not rinse detergent from its dispenser. When we open the door after the completed cycle, the soap (we use powdered soap) is all clumped together in the dispenser (the ...

Kenmore Elite dishwasher 655.16463300 not cleaning dishes Our Kenmore Elite dishwasher model number 655.16463300 is not cleaning very well. Almost 6 years old. I rinse my dishes before putting them in

...Kenmore Elite dishwasher, the water from the last cycle will not all drain out, inside of door is wet and water remains in bottom of dishwasher after cycle is complete check drain hose and air gap in ...

Kenmore elite dishwasher - setting the default wash Time to start the dishwasher (it works great!) - get eye glasses to be able to read the buttons, turn on the Smart Clean, Sani Clean, turn off the ...

...Kenmore elite dishwasher M#665.13419k701, when you run the cycle it shuts off after about 10 seconds and the normal wash light blinks. what can i check??? Thanks. Israel Hello, welcome to FixYa. I ...

kenmore elite dishwasher model 5770 the dishwasher fills - but when the cycle starts - it makes a noise like the motor is running but the wash arms are not moving. completes the cycle (whatever one I ...

...elite blink clean light or go on to www.sears.com/service talk to someone or look on line at www.youtube.com/kenmore_elite_blinking_clean_light see if anyone else had this ...

...kenmore elite dishwasher does not drain completely Look at the control panel and you will see a button that says "Cancel" and "Drain" Press the button after the wash cycle has completed and the ...

...KENMORE ELITE DISHWASHER. It starts, will fill make some clicking sounds, then drain, it will do this several times for the first 30 minutes but will not run. It then completes cycle bad control ...