Questions & Answers for: husqvarna 136 carb settings

...screws for carb for husqvarna 136 turn them both in , gently, till they bottom out and then back them out 1 1/2 turns. This will get you real close and then fine tune them from there. hope this

Husqvarna Model 136 chainsaw will only run for a short time with choke closed. Engine quits shortly after choke is opened. Take apart the fueling system and carb. Something is blocking or gummed up. ...

Where can i buy a walbro wt350 carburetor or alternative for a husqvarna 36 chainsaw ? The carbs will all fit from the 36/41/136/141/137/142 pt no. 530071987

husqvarna model 136 chainsaw that wont start.Has spark,gas compression trie with another spark plug if not heling check maybe air leak between cilinder and carb. also if not helpin rebuild carburattor

Husqvarna 136 is a 2stroke or not. And also what a company would do to my chain saw if i got a service done on it? Your saw is 2stroke, the mix is 50 to 1. a service would mean a new spark plug, clean

husqvarna 136 that won't start. If you put gas in carb it will start but won't keep running. Replace the fuel filter in the tank, check the fuel hose up to the carb for signs of leaking, if so

...husqvarna 141 will not start fuel up at carb but will not inject it into the bore. I put a brand new carb on the saw and still the same! The saw will start when you tip petrol down the bore! May be a ...

husqvarna 272xp carb tear down Same carb... Husqvarna 136 Chainsaw Carburetor Rebuild Fuel Line Repair

...husqvarna 136 chainsaw You will fully disassemble the engine as you must the cylinder from the crankcase. Husqvarna only sells the seals with the bearings they must be pressed on to the bearings. ...

why is my chainsaw blowing gas out the carb? cleaning the carb ,new fule diafram If it is blowing an excessive amount of fuel while it is running then the cylinder has aprobably worn down and the ...